GT35R Experiences 2.6l
GT35R Experiences 2.6l
I am trying to work what turbo I need for my 2.6. Im after something that will make fullboost by 4500rpm with an auto. Ive been looking at a GT3582R with a 0.84 rear. Has anyone had experiences with a turbo approx this size? Im also looking into a BW300 with a 63mm front wheel and 68mm rear or Master Power (not XSpower) T70 or T60. So it doesnt worry me whether its ball bearing or not, and lag isnt realy an issue. Just would like to know your experiences with 2.6. Thanks
- EVL076
- S-G Veteran
- Posts: 480
- Joined: Mon Mar 16, 2009 10:08 pm
- Location: Baggin' 4th and chirpin' 5th
Re: GT35R Experiences 2.6l
i have a Master Power T61
front wheel size is 61mm/91mm
rear wheel size is 64.5mm/74mm
with a .84 rear
cant give you any more info bout boosting or anything yet cos its not running
but just thought i would share that info lol
front wheel size is 61mm/91mm
rear wheel size is 64.5mm/74mm
with a .84 rear
cant give you any more info bout boosting or anything yet cos its not running
but just thought i would share that info lol
Re: GT35R Experiences 2.6l
What does the quality look like, shaft play, castings?
- EVL076
- S-G Veteran
- Posts: 480
- Joined: Mon Mar 16, 2009 10:08 pm
- Location: Baggin' 4th and chirpin' 5th
Re: GT35R Experiences 2.6l
it seems alright
there is no more shaft play than a brand new garrett has
so its very minimal...
they are 360 degree thrust from factory
the wheels seem good quality
the housings seem pretty well cast and clean
i will find out soon enough what its like
its gonna be running 25psi
there is no more shaft play than a brand new garrett has
so its very minimal...
they are 360 degree thrust from factory
the wheels seem good quality
the housings seem pretty well cast and clean
i will find out soon enough what its like
its gonna be running 25psi