Astron bore spacing.
Astron bore spacing.
anyone know? I don't have a short motor handy to measure
- 81GL
- Sigma-Galant Police (Global Mod)
- Posts: 912
- Joined: Mon Mar 23, 2009 7:27 am
- Location: Mildura Sunraysia Vic
Re: Astron bore spacing.
Bore spacing... just to clarify... centre to centre of bores?
Do have a 2.6 in pieces i can measure if wanted?
Nick.
Do have a 2.6 in pieces i can measure if wanted?
Nick.
Old school Mitsu's, its not a hobby; it's a life style.
-
- Posts: 166
- Joined: Mon Apr 06, 2009 2:33 am
- Location: Toowoomba QLD
Re: Astron bore spacing.
I have a 2ltr in pieces at moment too, hopefully getting put back together real soon if I can take any measurements for you just tell me how you want them, just mine's bored out 50 thou though.
Re: Astron bore spacing.
yeah centre to centre. would be much appreciated. thanks guys
Re: Astron bore spacing.
off the top of my head i would go with 101.10mm
anyone ? ill check it when i get back to the workshop on friday
cheers stealth
anyone ? ill check it when i get back to the workshop on friday
cheers stealth
Engineering the unfair advantage !
Red bull , fuelling the fastest race cars on earth !
Red bull , fuelling the fastest race cars on earth !
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: Astron bore spacing.
im with stealth 101.1 same as ford 4.6 5.4 V8
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
- 81GL
- Sigma-Galant Police (Global Mod)
- Posts: 912
- Joined: Mon Mar 23, 2009 7:27 am
- Location: Mildura Sunraysia Vic
Re: Astron bore spacing.
Yeah, 101.1 looks like it would be on the mark I need some verniers bad
Old school Mitsu's, its not a hobby; it's a life style.
Re: Astron bore spacing.
thanks guys, i was looking into wet sleeves but it seems the biggest one i'd be able to fit could be bored out to a max of 95mm.
probably not worth $2500 for that lol. considering an .080 overbore is less than 2mm shy of that anyhow.
probably not worth $2500 for that lol. considering an .080 overbore is less than 2mm shy of that anyhow.