Factory turbo rebuild

This section is for talk about anything to do with everything in the engine bay.
Post Reply
User avatar
ralliartsigma
Posts: 46
Joined: Wed Sep 16, 2009 8:37 pm
Location: Tasmania

Factory turbo rebuild

Post by ralliartsigma »

Hi all, long time no post,
Just wondering if anyone has had any luck sourcing new Dished 4G52/G52B pistons recently?
The plan was to build at least one of my turbo motors back to factory spec I'm struggling to get hold of 2lt pistons.
Thanks in advance.
'83 GJ Wagon my baby, but sadly not driven enough.
'94 MJ Triton my daily in the colder months.
'81 GH Turbo No. 105 (WIP)
'81 GH Turbo No. 017
Taz
Posts: 517
Joined: Sun Apr 26, 2015 7:16 pm

Re: Factory turbo rebuild

Post by Taz »

Not sure if there is a flat top equivelant, but any reputable engine building shop will be able to mill out the top of the piston to be the dished equivelant (had to do it on my RVR when turbo pistons werent available they just dished NA pistons to same specs
Post Reply