Page 1 of 1
4g64 8v SOHC turbo into lb lancer HELP!
Posted: Mon Mar 07, 2016 1:10 pm
by fengqiu
So I could be protentially purchasing one of these and was wondering how much work i'ld need to do to get it in? it's a narrow block from a fwd sigma i think. Also will it be easy to find parts for it as these engines are so rare now... or will dohc and sohc carby bits swap over?
http://www.trademe.co.nz/Browse/Listing ... 1046364811 is the auction, what other things will I need to purchase?
I posted in the lancer section but it didn't post for some reason anyway if it is a double post, please go ahead and delete it mr admins!
Cheers
Adam
Re: 4g64 8v SOHC turbo into lb lancer HELP!
Posted: Tue Mar 08, 2016 7:15 pm
by simon
If it is a 4G63 ( according to the ad ), it should be a wide block station motor, unless they used different motors in NZ
Simon
Re: 4g64 8v SOHC turbo into lb lancer HELP!
Posted: Wed Mar 09, 2016 10:29 am
by fengqiu
The FWD SOHC g63 are narrow and RWD are wideblock
this one was a fwd i think
Re: 4g64 8v SOHC turbo into lb lancer HELP!
Posted: Wed Mar 09, 2016 5:10 pm
by 75wagon
This might help you identify what you are looking at:
Wide or Narrow (Motor or gearbox)?
More useful topics found here...
Ultimate Topic Directory (FAQ TOPICS)
I hope this helps...
Dave...
Re: 4g64 8v SOHC turbo into lb lancer HELP!
Posted: Wed Mar 09, 2016 8:37 pm
by fengqiu
I'm fairly confident about the engine being narrow block.
Anyone done this swap before with advice?
Re: 4g64 8v SOHC turbo into lb lancer HELP!
Posted: Thu Mar 10, 2016 7:28 am
by simon
I was only going on the photo ( I could not see an engine mount on the front of the block )
Either way it should go in without any major hassles
There would be some things to, the alternator could be on the other side of the block and you may need engine mounts from a L200 ?
Simon