Can anyone tell me if the non-balance shaft Astrons use the same water pump as the balance shaft engines?
I am having trouble finding anything to say they are different but would like some sort of confirmation before buying one.
Non balance shaft Astrons
-
- Sigma-Galant Police (Global Mod)
- Posts: 2119
- Joined: Sat Oct 22, 2011 6:48 am
- Location: melbourne
Re: Non balance shaft Astrons
Which non-balance shaft astron are u looking at specifically.....code/capacity wise???
Built with pride, Driven in anger
Re: Non balance shaft Astrons
C.Fernance posted this on another topic yesterday, I found this site very useful.
http://www.precisionintl.com/
http://www.precisionintl.com/
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: Non balance shaft Astrons
Non balance shaft astrons? Iirc he only ones from the factory that do the are 2.5 deisels from canters?
Re: Non balance shaft Astrons
Early 4G51 and 52 Astrons were non-balance shafts.
The precision international site lists the 1850 for a GE sigma but I am not sure if they were balance shafted engines or not.
They do list the GE 1850 pump as the same as all 4G52 and 54 but looking at them I am not sure
The precision international site lists the 1850 for a GE sigma but I am not sure if they were balance shafted engines or not.
They do list the GE 1850 pump as the same as all 4G52 and 54 but looking at them I am not sure
Re: Non balance shaft Astrons
There is a 54 thats has no balance shafts
Some Mitsubishi forklifts have them
Cheers stealth
Some Mitsubishi forklifts have them
Cheers stealth
Engineering the unfair advantage !
Red bull , fuelling the fastest race cars on earth !
Red bull , fuelling the fastest race cars on earth !
Re: Non balance shaft Astrons
Forgot about the forklifts, cheers Stealth
Re: Non balance shaft Astrons
Stealth's right - I sourced most of my 52' non balance shaft from a forklift supply side.
Great engine - bulletproof bottom end and the heads can be massively ported
Finding bits for rebuilds are getting harder though - NZ still has stock around the place - check with some of the NZ lads.
Great engine - bulletproof bottom end and the heads can be massively ported
Finding bits for rebuilds are getting harder though - NZ still has stock around the place - check with some of the NZ lads.
Good drivers have dead bugs on the side windows.....