Hi,
i am looking of getting rid of the old 4G32 in my 78 sigma and putting in a 4g63 and was wondering if i can use all the old engine mounts also will my gearbox mount work or can i use my one i have from a 83 L200.
Any and all help would be appreciated.
Thanks Paul.
4G32 to 4G63 help
-
Rally_2.6LC
- Posts: 954
- Joined: Sun Mar 22, 2009 10:59 am
- Location: Either under a car, on the computer or in bed...around Ryde
Re: 4G32 to 4G63 help
Hey mate,
Look through the builds section and search for 4G63 conversion as a lot of people have done them.
That should answer any of your questions (and most include photos).
Good luck with the build.
Cheers
Matt
Look through the builds section and search for 4G63 conversion as a lot of people have done them.
That should answer any of your questions (and most include photos).
Good luck with the build.
Cheers
Matt
'75 GC daily (slowly dying)
'80 LC 2.6L rally car (generally something broken until 2 weeks before an event)
'71 GA 2.6 Turbo project (i only wanted the diff and got another project)
^This side up^
Formely "Matt"
'80 LC 2.6L rally car (generally something broken until 2 weeks before an event)
'71 GA 2.6 Turbo project (i only wanted the diff and got another project)
^This side up^
Formely "Matt"
-
orangelancer
- Posts: 636
- Joined: Sun Feb 20, 2011 10:52 am
Re: 4G32 to 4G63 help
apparently sigma ones work. I used starion ones for the engine. I also used the factory gearbox mount from the lancer with a few washers in between the bolt.
