after running 17pound on my sigma for the last 2 weeks im starting to hear a sight knock...lol. i want to put new
forged pistons, rods, and crankshaft in . ill hone the block but i dont want to go to over sized. what kit do most people
put in? and how much? and where should i get it?
what to get???
- Sigmaproject
- Posts: 1143
- Joined: Sun Mar 22, 2009 7:11 am
- Location: Maitland NSW
Re: what to get???
Hmmmmm went a bit power crazy eh.
The factory supply forged rods and crank, so you only have to find the pistons ;)
But if your baby is running a little lean up top, forged pistons will go the same way as the stockys.
I ran 18lb for a couple of days, but I started hearing voices saying "this is not good"
The factory supply forged rods and crank, so you only have to find the pistons ;)
But if your baby is running a little lean up top, forged pistons will go the same way as the stockys.
I ran 18lb for a couple of days, but I started hearing voices saying "this is not good"
Re: what to get???
lol its just to much fun. does the 4g54 have forged rods and crank? or just the 2l turbo motors
- Sigmaproject
- Posts: 1143
- Joined: Sun Mar 22, 2009 7:11 am
- Location: Maitland NSW
Re: what to get???
-
They all have forged rods and cranks
They all have forged rods and cranks
Re: what to get???
I heard that the TS Magna 4G54 rods are the best of the factory offerings in terms of strength. Not sure, though. Maybe someone can confirm this?
-Josh.
Daily: 7/96 EF Falcon, 4.0 SOHC, BTR95LE, 3.45:1 LSD/Lukey extractors, full 2.5” exhaust, EL intake, Tickford snorkel, 87DA cam, AU injectors, shiftkits.com.au single stage kit. PB 14.93@91mph.
Project: Red '81 Scorpion-http://www.sigma-galant.com/viewtopic.php?f=46&t=11889
Daily: 7/96 EF Falcon, 4.0 SOHC, BTR95LE, 3.45:1 LSD/Lukey extractors, full 2.5” exhaust, EL intake, Tickford snorkel, 87DA cam, AU injectors, shiftkits.com.au single stage kit. PB 14.93@91mph.
Project: Red '81 Scorpion-http://www.sigma-galant.com/viewtopic.php?f=46&t=11889