Hey guys I found this on ebay...I know it says "suits 4G32" but sometimes engines differ if they are made later. So was wondering if it would fit my 4G32 in my Galant as i think it looks slightly different.
ebay number: 170316027194
Item description:
BRAND NEW IN BOX 4G32 L300 80-85 MODEL MITSUBISHI WATER PUMP, NOT 100% WHAT OTHER MODELS IT FITS TAKE A LOOK AT PIC TO SEE IF IT LOOKS LIKE THE ONE YOUR AFTER,THE BRAND IS GMB,PLASTIC ONLY TAKEN OFF FOR PICTURE,ANY QUESTIONS PLEASE ASK,GOOD LUCK AND HAPPY BIDDING.
Cheers Matt
4G32 waterpump
-
Rally_2.6LC
- Posts: 954
- Joined: Sun Mar 22, 2009 10:59 am
- Location: Either under a car, on the computer or in bed...around Ryde
4G32 waterpump
'75 GC daily (slowly dying)
'80 LC 2.6L rally car (generally something broken until 2 weeks before an event)
'71 GA 2.6 Turbo project (i only wanted the diff and got another project)
^This side up^
Formely "Matt"
'80 LC 2.6L rally car (generally something broken until 2 weeks before an event)
'71 GA 2.6 Turbo project (i only wanted the diff and got another project)
^This side up^
Formely "Matt"
Re: 4G32 waterpump
dont mix belt drive with chain and you should do ok , didnt look but that sounds like a belt engine water pump.
Roger
Roger
"can I put Corolla pistons in my Anchortron with a Hyundai head? will it do better burnouts with 40 solex's? "...... Im so needing coffee...
-
Rally_2.6LC
- Posts: 954
- Joined: Sun Mar 22, 2009 10:59 am
- Location: Either under a car, on the computer or in bed...around Ryde
Re: 4G32 waterpump
yea i had a look at it again and the water outlet is actually attached to the pump....where as on mine its not, its a lot smaller.......didnt realise there was a difference...but doesnt matter i got one off a mate for free YAY
Cheers Matt
Cheers Matt
'75 GC daily (slowly dying)
'80 LC 2.6L rally car (generally something broken until 2 weeks before an event)
'71 GA 2.6 Turbo project (i only wanted the diff and got another project)
^This side up^
Formely "Matt"
'80 LC 2.6L rally car (generally something broken until 2 weeks before an event)
'71 GA 2.6 Turbo project (i only wanted the diff and got another project)
^This side up^
Formely "Matt"
-
Mr Aerospace
- Posts: 116
- Joined: Wed Mar 18, 2009 9:31 am
- Location: Brunswick, Melbourne
Re: 4G32 waterpump
Actually, just like the 4G54...there's a fair few 4G32's as well. (4G32 / 4G32b w.o balance shafts / 4G32b w balance shafts / 4G32b EFI / 4G32 EFI Turbo)...I'm not too sure this will suit our earlier model 4G32's anyway...certainly not the chain drive, or standard belt drive.
