What's the go with these?? If i happened to find one, how would i go bolting it to a sohc block?
Could I get my cam out of the sohc, get another one to suit, and use those?
Are the cold and hot sides the same? (Can I use my twin carbs/manifold, and exhaust)?
Head gaskets, are they NLA?
Do all water chambers etc line up?
Cheers,
Mick
Twin cam g32
Twin cam g32
N/A ALL THE WAY
Re: Twin cam g32
The twin cam motors are the same from the head gasket down, except for the longer timing chain.
No your carby manifold wont fit.
No your exhaust manifold wont fit either.
But it will bolt straight up to a stock block.
Dave...
No your carby manifold wont fit.
No your exhaust manifold wont fit either.
But it will bolt straight up to a stock block.
Dave...
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: Twin cam g32
sump is different , timing case cover is different , dizzy water pump?
u can still buy head gaskets
read this
http://www.performanceforums.com/forums ... -LA-Lancer
thats the engine i have now
u can still buy head gaskets
read this
http://www.performanceforums.com/forums ... -LA-Lancer
thats the engine i have now