4g54 into chrysler lancer. Need some tips.

This section is for 1973 to 1981 Chrysler/Mitsubishi/Colt/Dodge/Plymouth Lancer/Valiant/Celeste/Colt/Arrow.
Post Reply
Frazajay
Posts: 2
Joined: Mon Mar 21, 2016 8:22 pm

4g54 into chrysler lancer. Need some tips.

Post by Frazajay »

Gday guys. Now i know this has probly been covered a million times before, but from my searches there are a few pieces left of the puzzle. I have done the vr4 turbo into an express before so familiar with all the narrow wide stuff. What ive got is a 4g32 with a jap 5speed. Im building a narrow 4g54 out of an auto scorpion. Im just curiouse as to what 6 bolt flywheel and clutch to use and if to worry about counting teeth on flywheels. And if i should use the auto scorpion starter or my lancer.

Thanks heaps guys
mstrrab1992
Posts: 548
Joined: Wed Sep 21, 2011 1:13 pm
Location: Sunshine coast ATM

Re: 4g54 into chrysler lancer. Need some tips.

Post by mstrrab1992 »

You need a flywheel out of a 2L sigma 4g52, and a clutch from a 2L sigma ge/gh from what I known I'm doing the conversion soon myself. I head the magna 4g54 flywheels will work too.
All Animals to the Crow: Your not a zoo animal!
Monkey to crow:your just jealous cause noone says "mummy mummy i want to see a crow!"
User avatar
stealth
Posts: 1038
Joined: Wed Mar 18, 2009 3:59 pm
Location: Gold coast, QLD

Re: 4g54 into chrysler lancer. Need some tips.

Post by stealth »

The flywheel you can use a magna flywheel
As for the clutch count the spline on the imput shaft either 21 or 23 tooth and measure the dia of the flywheel once you get it
Cheers stealth
Engineering the unfair advantage !
Red bull , fuelling the fastest race cars on earth !
Post Reply