Carby size for 4g52
Carby size for 4g52
I was originally intending on getting twin 45dcoe carbies for the 4g52 but several people say it might be too much for the 2l engine. Should I go smaller? Any guidance on this matter would be appreciated.
-
- Posts: 548
- Joined: Wed Sep 21, 2011 1:13 pm
- Location: Sunshine coast ATM
Re: Carby size for 4g52
My research shows a 32/36 weber will be good, each to their own I guess tho
All Animals to the Crow: Your not a zoo animal!
Monkey to crow:your just jealous cause noone says "mummy mummy i want to see a crow!"
Monkey to crow:your just jealous cause noone says "mummy mummy i want to see a crow!"
-
- Sigma-Galant Police (Global Mod)
- Posts: 2119
- Joined: Sat Oct 22, 2011 6:48 am
- Location: melbourne
Re: Carby size for 4g52
Either approach has pros and cons depending on ur application of course
Built with pride, Driven in anger
Re: Carby size for 4g52
Well it is also getting titanium valve springs, extractors, a mild cam and forged pistons. I want it to move. I'm concerned that 45s will be counterproductive for performance though. I don't know a lot about cfm and how it relates to appropriate carby size.
-
- Posts: 548
- Joined: Wed Sep 21, 2011 1:13 pm
- Location: Sunshine coast ATM
Re: Carby size for 4g52
I don't know much. But I do know know if you push more air out you'll benefit From letting more air in. If u catch my drift. So if your doing that sort of work to it. A set of twins isn't gonna hurt unless your budget doesn't let you.
All Animals to the Crow: Your not a zoo animal!
Monkey to crow:your just jealous cause noone says "mummy mummy i want to see a crow!"
Monkey to crow:your just jealous cause noone says "mummy mummy i want to see a crow!"
Re: Carby size for 4g52
No point putting twin 45's on it, twin 40's would have less of a step down in throat sizing once you choke them down to 34mm.
I know that isn't a weber chart, but the information shouldn't be too far off the mark.
Dave.
I know that isn't a weber chart, but the information shouldn't be too far off the mark.
Dave.
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers