Hi guys
Does anyone have a picture of the bottom side of the Celeste (LB/LC Lancer hatchback) body, just above the differential? I have there 2 bolt holes but there is nothing mounted. And I have the rubber damper installed about 20 cm's forward of it... Should there be a 2nd damper on that location?
Thanx!
Sven
wanted: picture of bottom side body
-
BlueThunder
- Posts: 338
- Joined: Thu Oct 14, 2010 2:18 am
- Location: Antwerp
-
Rally_2.6LC
- Posts: 954
- Joined: Sun Mar 22, 2009 10:59 am
- Location: Either under a car, on the computer or in bed...around Ryde
Re: wanted: picture of bottom side body
I just had a look under mine. I cannot see the two extra bolt holes you describe.
I have the rubber stopper just above the diff, but no other bolt holes. There is a single hole that goes through the floor, where the wiring for the fuel gauge go through but that is it.
Cheers
Matt
I have the rubber stopper just above the diff, but no other bolt holes. There is a single hole that goes through the floor, where the wiring for the fuel gauge go through but that is it.
Cheers
Matt
'75 GC daily (slowly dying)
'80 LC 2.6L rally car (generally something broken until 2 weeks before an event)
'71 GA 2.6 Turbo project (i only wanted the diff and got another project)
^This side up^
Formely "Matt"
'80 LC 2.6L rally car (generally something broken until 2 weeks before an event)
'71 GA 2.6 Turbo project (i only wanted the diff and got another project)
^This side up^
Formely "Matt"
-
BlueThunder
- Posts: 338
- Joined: Thu Oct 14, 2010 2:18 am
- Location: Antwerp
Re: wanted: picture of bottom side body
Thanks! Strange, as far as i can tell they are there from factory... I'll try to take a picture of them next week...
Greetz
Sven
Greetz
Sven
Re: wanted: picture of bottom side body
I have a couple pics, but they aren't the best.
