Gday guys. Now i know this has probly been covered a million times before, but from my searches there are a few pieces left of the puzzle. I have done the vr4 turbo into an express before so familiar with all the narrow wide stuff. What ive got is a 4g32 with a jap 5speed. Im building a narrow 4g54 out of an auto scorpion. Im just curiouse as to what 6 bolt flywheel and clutch to use and if to worry about counting teeth on flywheels. And if i should use the auto scorpion starter or my lancer.
Thanks heaps guys
4g54 into chrysler lancer. Need some tips.
-
- Posts: 548
- Joined: Wed Sep 21, 2011 1:13 pm
- Location: Sunshine coast ATM
Re: 4g54 into chrysler lancer. Need some tips.
You need a flywheel out of a 2L sigma 4g52, and a clutch from a 2L sigma ge/gh from what I known I'm doing the conversion soon myself. I head the magna 4g54 flywheels will work too.
All Animals to the Crow: Your not a zoo animal!
Monkey to crow:your just jealous cause noone says "mummy mummy i want to see a crow!"
Monkey to crow:your just jealous cause noone says "mummy mummy i want to see a crow!"
Re: 4g54 into chrysler lancer. Need some tips.
The flywheel you can use a magna flywheel
As for the clutch count the spline on the imput shaft either 21 or 23 tooth and measure the dia of the flywheel once you get it
Cheers stealth
As for the clutch count the spline on the imput shaft either 21 or 23 tooth and measure the dia of the flywheel once you get it
Cheers stealth
Engineering the unfair advantage !
Red bull , fuelling the fastest race cars on earth !
Red bull , fuelling the fastest race cars on earth !