Rear swaybar

This section is for 1976 to 1984 Chrysler/Mitsubishi/Colt/Dodge/Plymouth Scorpion/Lambda/Sapporo/Challenger.
Post Reply
webby
Posts: 1644
Joined: Thu Apr 02, 2009 10:38 am
Location: Parkes, NSW

Rear swaybar

Post by webby »

I know Scorpions didn't have one, or at least the three I have didn't.

Anyway, how would you go about mounting one? Stock Sigma swaybar, Sigma lower trailing arms, attach it to the diff/body somehow? Or am I completely off?
-Josh.
Image
Daily: 7/96 EF Falcon, 4.0 SOHC, BTR95LE, 3.45:1 LSD/Lukey extractors, full 2.5” exhaust, EL intake, Tickford snorkel, 87DA cam, AU injectors, shiftkits.com.au single stage kit. PB 14.93@91mph.
Project: Red '81 Scorpion-http://www.sigma-galant.com/viewtopic.php?f=46&t=11889
User avatar
jvflash
Posts: 492
Joined: Sat Jan 29, 2011 5:26 pm
Location: Adelaide

Re: Rear swaybar

Post by jvflash »

You can buy them from the USA - Addco 349 Rear Anti Sway Bar Stabilizer Roll

eBay seller - neverenoughauto did carry them.

They sent me the install manual and the holes all line up with the Oz version.
User avatar
jvflash
Posts: 492
Joined: Sat Jan 29, 2011 5:26 pm
Location: Adelaide

Re: Rear swaybar

Post by jvflash »

Josh, PM sent to you.

Image
Paddles
Posts: 405
Joined: Wed Mar 18, 2009 6:41 pm
Location: Hobart, Tasmania

Re: Rear swaybar

Post by Paddles »

i use a selbys sway bar. they are great, they mount up with rubber bushes and 'U' brackets. only a couple hundred.
'84 GL Scorp, Mildly Worked 2.6 With Sigma Turbo Setup.
endlss
Posts: 55
Joined: Mon Mar 30, 2009 3:20 pm
Location: hallam, vic
Contact:

Re: Rear swaybar

Post by endlss »

when the weather gets better i can take some fotos of the set up i have think its white line front and back , if it will help
i think i have a spare rear one in the shed
User avatar
jvflash
Posts: 492
Joined: Sat Jan 29, 2011 5:26 pm
Location: Adelaide

Re: Rear swaybar

Post by jvflash »

They are back on eBay again about AU$155 when I looked

http://www.ebay.com.au/itm/Addco-302-Re ... 1c2947ad22
webby
Posts: 1644
Joined: Thu Apr 02, 2009 10:38 am
Location: Parkes, NSW

Re: Rear swaybar

Post by webby »

Cheers fellas.
-Josh.
Image
Daily: 7/96 EF Falcon, 4.0 SOHC, BTR95LE, 3.45:1 LSD/Lukey extractors, full 2.5” exhaust, EL intake, Tickford snorkel, 87DA cam, AU injectors, shiftkits.com.au single stage kit. PB 14.93@91mph.
Project: Red '81 Scorpion-http://www.sigma-galant.com/viewtopic.php?f=46&t=11889
BAD-SIG
Posts: 520
Joined: Tue Mar 24, 2009 6:05 am
Location: Ballarat, VIC
Contact:

Re: Rear swaybar

Post by BAD-SIG »

I have a Whiteline PRM36 (could be BRM36 coz the sticker is slightly ripped) rear sway bar that I was told is from a GH Sigma that was used for circuit racing. I had a quick look under the rear of my GE Sigma and couldn't work out exactly how to mount the sway bar to the diff. Thanks for that diagram above, it has helped me a bit, but it would be great if someone with this bar fitted could post some photos of it, even if it's on a Scorpion. My GE Sigma has a banjo type diff which is basically a baby version of the Scorpion diff, so hopefully it all fits.
Please click below to visit my blog dedicated to my GE Sigma SE:
http://www.galant-sigma.com

Please click below to visit my cardomain website dedicated to my GE Sigma SE:
http://www.cardomain.com/ride/293989

Image
Post Reply