GJ Scorp rear guard measurements

This section is for 1976 to 1984 Chrysler/Mitsubishi/Colt/Dodge/Plymouth Scorpion/Lambda/Sapporo/Challenger.
Post Reply
webby
Posts: 1644
Joined: Thu Apr 02, 2009 10:38 am
Location: Parkes, NSW

GJ Scorp rear guard measurements

Post by webby »

Can somebody grab some measurements from the rear of a GJ Scorpion for me? I need the distance from the outer edge of the shock absorber to the hub mounting face and the hub mounting face to the lip of the guard.
Trying to work out the offset I'll need to get 10's under the back of mine, a little bit of poke's fine as I'm going to be running 205/50's (safety blah, I won't be running the 10's daily. I'll have another pair of 8's for the rear in a different offset) but it can't be too much as I don't particularly want to run flares.
Cheers in advance for any help guys :)
-Josh.
Image
Daily: 7/96 EF Falcon, 4.0 SOHC, BTR95LE, 3.45:1 LSD/Lukey extractors, full 2.5” exhaust, EL intake, Tickford snorkel, 87DA cam, AU injectors, shiftkits.com.au single stage kit. PB 14.93@91mph.
Project: Red '81 Scorpion-http://www.sigma-galant.com/viewtopic.php?f=46&t=11889
Post Reply