Scorpion suspension

This section is for 1976 to 1984 Chrysler/Mitsubishi/Colt/Dodge/Plymouth Scorpion/Lambda/Sapporo/Challenger.
Post Reply
Paddles
Posts: 405
Joined: Wed Mar 18, 2009 6:41 pm
Location: Hobart, Tasmania

Scorpion suspension

Post by Paddles »

Hey all,
I was wondering what people have done to lower there scorps beyond the 30mm lowered springs you can buy?
'84 GL Scorp, Mildly Worked 2.6 With Sigma Turbo Setup.
Scorpma82
Sigma-Galant Police (Global Mod)
Posts: 2119
Joined: Sat Oct 22, 2011 6:48 am
Location: melbourne

Re: Scorpion suspension

Post by Scorpma82 »

I believe both Makita and Ryobi offer some form of height reduction beyond 30mm

Also, try Bosch. They might have something too
Built with pride, Driven in anger
Paddles
Posts: 405
Joined: Wed Mar 18, 2009 6:41 pm
Location: Hobart, Tasmania

Re: Scorpion suspension

Post by Paddles »

Love the answer. Was more looking for anyone running starion coil overs? Or a super low Spring etc?
'84 GL Scorp, Mildly Worked 2.6 With Sigma Turbo Setup.
Scorpma82
Sigma-Galant Police (Global Mod)
Posts: 2119
Joined: Sat Oct 22, 2011 6:48 am
Location: melbourne

Re: Scorpion suspension

Post by Scorpma82 »

In all honesty, I'm not sure on how ppl with scorps have gone going past 30

From what I understand, the vast majority have been custom coilovers


U can try grabbing the 30mm springs, then have them professionally compressed further.....although this seems to be a "hit and miss" with ppl.
Built with pride, Driven in anger
Scratchbuilt
Posts: 31
Joined: Sun Apr 27, 2014 9:13 pm

Re: Scorpion suspension

Post by Scratchbuilt »

How many coils need to be clipped to go 50mm or 75mm lower. Is it the old standard of half a coil for a 1 inch drop.
Post Reply