repro GE-GH dashpads anyone interested?

This section is for 1976 to 1984 Chrysler/Mitsubishi/Colt/Dodge/Plymouth Scorpion/Lambda/Sapporo/Challenger.
Post Reply
User avatar
theozsnowman
Posts: 137
Joined: Sun Apr 14, 2013 4:00 pm
Location: Mount Clear Victoria
Contact:

repro GE-GH dashpads anyone interested?

Post by theozsnowman »

im considering building a mould to allow me to do up a couple of leather skinned top dash pads to fit my scorpions and to help offset the cost im wondering if anyone else would be interested in them?

Once built they would be skinned in stitched leather or vinyl to suit and match the original
My 1980 GH Scorpion Restoration Project - The Oz Snowmans Scorpion - Meet B1 and B2 - The Grey Ghost
bigfoot
Posts: 21
Joined: Thu Jul 04, 2013 11:27 am

Re: repro GE-GH dashpads anyone interested?

Post by bigfoot »

could be keen on a vinyl one. depending on price/how much it costs to get it this side of the ditch
Superscan811
Posts: 1689
Joined: Sun Mar 22, 2009 4:12 pm
Location: Sydney

Re: repro GE-GH dashpads anyone interested?

Post by Superscan811 »

Depending on the price, I'd be interested in 2.



Cheers.
User avatar
theozsnowman
Posts: 137
Joined: Sun Apr 14, 2013 4:00 pm
Location: Mount Clear Victoria
Contact:

Re: repro GE-GH dashpads anyone interested?

Post by theozsnowman »

yeah price will be determined by the numbers that may be interested as naturally if i can produce more the price can get driven down...
My 1980 GH Scorpion Restoration Project - The Oz Snowmans Scorpion - Meet B1 and B2 - The Grey Ghost
A112H
Posts: 7681
Joined: Tue Mar 24, 2009 5:01 am

Re: repro GE-GH dashpads anyone interested?

Post by A112H »

Dependent on price on look I would want one, maybe two
User avatar
LukeAussie
Posts: 353
Joined: Fri May 18, 2012 9:55 am
Location: Adelaide

Re: repro GE-GH dashpads anyone interested?

Post by LukeAussie »

Jason, welcome back!
BIGDAN
Posts: 35
Joined: Fri Apr 25, 2014 5:46 pm

Re: repro GE-GH dashpads anyone interested?

Post by BIGDAN »

Depending on price I need 2 ... but 1 extra for a spare ....
:-)
User avatar
BlueThunder
Posts: 338
Joined: Thu Oct 14, 2010 2:18 am
Location: Antwerp

Re: repro GE-GH dashpads anyone interested?

Post by BlueThunder »

If you could do some LHD LB/LC Lancer Hatchback (Celeste) ones I would take 1 or 2, maybe more...
Image
Oldfart
Posts: 35
Joined: Sat Oct 05, 2013 7:23 pm

Re: repro GE-GH dashpads anyone interested?

Post by Oldfart »

Was there ever anything further with the dash reproductions?
The older I get the better I used to be
A112H
Posts: 7681
Joined: Tue Mar 24, 2009 5:01 am

Re: repro GE-GH dashpads anyone interested?

Post by A112H »

As above, still suffering from Scorpion dash over here :$
Oldfart
Posts: 35
Joined: Sat Oct 05, 2013 7:23 pm

Re: repro GE-GH dashpads anyone interested?

Post by Oldfart »

Might have to see a decent upholster to make up a new top section
The older I get the better I used to be
webby
Posts: 1644
Joined: Thu Apr 02, 2009 10:38 am
Location: Parkes, NSW

Re: repro GE-GH dashpads anyone interested?

Post by webby »

I'd be keen, depending on price. That's assuming I can make the early dash fit in a GJ, lol
-Josh.
Image
Daily: 7/96 EF Falcon, 4.0 SOHC, BTR95LE, 3.45:1 LSD/Lukey extractors, full 2.5” exhaust, EL intake, Tickford snorkel, 87DA cam, AU injectors, shiftkits.com.au single stage kit. PB 14.93@91mph.
Project: Red '81 Scorpion-http://www.sigma-galant.com/viewtopic.php?f=46&t=11889
User avatar
theozsnowman
Posts: 137
Joined: Sun Apr 14, 2013 4:00 pm
Location: Mount Clear Victoria
Contact:

Re: repro GE-GH dashpads anyone interested?

Post by theozsnowman »

I'm still working on a suitable mould and closed foam base... Looking to get a 3d map done of my good one in a few weeks so I can look to get some inserts done on a cnc...

The internal metal brace and bolt pins is proving to be a bit of a challenge
My 1980 GH Scorpion Restoration Project - The Oz Snowmans Scorpion - Meet B1 and B2 - The Grey Ghost
User avatar
doofis200
Posts: 24
Joined: Thu Aug 25, 2016 6:51 pm
Location: Latrobe Valley, Victoria

Re: repro GE-GH dashpads anyone interested?

Post by doofis200 »

I would definitely be interested in one, depending on price.
Rust-Bucket: A Car With Free Air-conditioning
A112H
Posts: 7681
Joined: Tue Mar 24, 2009 5:01 am

Re: repro GE-GH dashpads anyone interested?

Post by A112H »

Any movement here snowman?
A112H
Posts: 7681
Joined: Tue Mar 24, 2009 5:01 am

Re: repro GE-GH dashpads anyone interested?

Post by A112H »

Getting very close to needing one here.
Any news?
Greenscorp
Posts: 1
Joined: Mon May 29, 2017 8:17 pm

Re: repro GE-GH dashpads anyone interested?

Post by Greenscorp »

I'm interested in one or two of them depending on the price.
User avatar
doofis200
Posts: 24
Joined: Thu Aug 25, 2016 6:51 pm
Location: Latrobe Valley, Victoria

Re: repro GE-GH dashpads anyone interested?

Post by doofis200 »

Did anything further end up happening with these?
Rust-Bucket: A Car With Free Air-conditioning
User avatar
theozsnowman
Posts: 137
Joined: Sun Apr 14, 2013 4:00 pm
Location: Mount Clear Victoria
Contact:

Re: repro GE-GH dashpads anyone interested?

Post by theozsnowman »

Sorry still working it out...but my priority has been getting my GH ready to spray.... Been very time poor due to speedway cars and stuff...

Ive made a positive mould but wasnt happy with it so will be doing some more reshaping before trialling some negatives
My 1980 GH Scorpion Restoration Project - The Oz Snowmans Scorpion - Meet B1 and B2 - The Grey Ghost
Post Reply