Page 1 of 1

repro GE-GH dashpads anyone interested?

PostPosted: Sat Jun 07, 2014 1:27 pm
by theozsnowman
im considering building a mould to allow me to do up a couple of leather skinned top dash pads to fit my scorpions and to help offset the cost im wondering if anyone else would be interested in them?

Once built they would be skinned in stitched leather or vinyl to suit and match the original

Re: repro GE-GH dashpads anyone interested?

PostPosted: Sat Jun 07, 2014 3:37 pm
by bigfoot
could be keen on a vinyl one. depending on price/how much it costs to get it this side of the ditch

Re: repro GE-GH dashpads anyone interested?

PostPosted: Sat Jun 07, 2014 10:47 pm
by Superscan811
Depending on the price, I'd be interested in 2.



Cheers.

Re: repro GE-GH dashpads anyone interested?

PostPosted: Sun Jun 08, 2014 3:08 pm
by theozsnowman
yeah price will be determined by the numbers that may be interested as naturally if i can produce more the price can get driven down...

Re: repro GE-GH dashpads anyone interested?

PostPosted: Tue Jun 10, 2014 6:06 am
by A112H
Dependent on price on look I would want one, maybe two

Re: repro GE-GH dashpads anyone interested?

PostPosted: Fri Jun 13, 2014 9:34 am
by LukeAussie
Jason, welcome back!

Re: repro GE-GH dashpads anyone interested?

PostPosted: Sat Jun 14, 2014 2:47 pm
by BIGDAN
Depending on price I need 2 ... but 1 extra for a spare ....
:-)

Re: repro GE-GH dashpads anyone interested?

PostPosted: Sat Jun 14, 2014 7:05 pm
by BlueThunder
If you could do some LHD LB/LC Lancer Hatchback (Celeste) ones I would take 1 or 2, maybe more...

Re: repro GE-GH dashpads anyone interested?

PostPosted: Fri Dec 30, 2016 10:56 am
by Oldfart
Was there ever anything further with the dash reproductions?

Re: repro GE-GH dashpads anyone interested?

PostPosted: Sat Dec 31, 2016 11:56 am
by A112H
As above, still suffering from Scorpion dash over here :$

Re: repro GE-GH dashpads anyone interested?

PostPosted: Sun Jan 01, 2017 11:14 am
by Oldfart
Might have to see a decent upholster to make up a new top section

Re: repro GE-GH dashpads anyone interested?

PostPosted: Mon Jan 02, 2017 8:33 pm
by webby
I'd be keen, depending on price. That's assuming I can make the early dash fit in a GJ, lol

Re: repro GE-GH dashpads anyone interested?

PostPosted: Wed Jan 25, 2017 6:13 pm
by theozsnowman
I'm still working on a suitable mould and closed foam base... Looking to get a 3d map done of my good one in a few weeks so I can look to get some inserts done on a cnc...

The internal metal brace and bolt pins is proving to be a bit of a challenge

Re: repro GE-GH dashpads anyone interested?

PostPosted: Fri Mar 31, 2017 6:15 pm
by doofis200
I would definitely be interested in one, depending on price.

Re: repro GE-GH dashpads anyone interested?

PostPosted: Sat Apr 01, 2017 12:14 pm
by A112H
Any movement here snowman?

Re: repro GE-GH dashpads anyone interested?

PostPosted: Thu Apr 27, 2017 10:39 am
by A112H
Getting very close to needing one here.
Any news?

Re: repro GE-GH dashpads anyone interested?

PostPosted: Wed Jul 26, 2017 10:48 pm
by Greenscorp
I'm interested in one or two of them depending on the price.