boss kits

This section is for scorpion owners only and the tips, mods, and tech talk.

Moderator: Scorpion Space Sentry (Mod)

boss kits

Postby efisig » Fri Jul 02, 2010 10:13 am

hey im kinda new to this i have a 1979 chrysler gh scorpian, and im looking tryin to find what boss kit i need to put on my momo wheel. if any one knows the one that fit thnks!
efisig
 
Posts: 4
Joined: Mon Mar 29, 2010 4:06 pm
Country: Australia (au)

Re: boss kits

Postby C_Fernance » Fri Jul 02, 2010 2:21 pm

Same boss kit as the Sigma, Galant, Lancer, Starion and so on. Just make sure you get one with the correct stud pattern as there are a couple of different ones. Obviously a Momo one will work, but the Autotechnica does too as they are a multistud pattern. I'm not sure about the Saas one.

Autotechnica part # 900

Saas part # 1BK90L

Momo part # 6101
C_Fernance
Scorpion Space Sentry (Mod)
 
Posts: 280
Joined: Tue Mar 17, 2009 1:19 am
Location: Central Coast
Country: Australia (au)

Re: boss kits

Postby Galant_GT0 » Fri Jul 02, 2010 2:54 pm

Jason

Image
User avatar
Galant_GT0
 
Posts: 1485
Joined: Tue Mar 24, 2009 5:01 am
Location: Adelaide
Country: Sigma-Galant (s)

Re: boss kits

Postby oldn64 » Thu Jul 22, 2010 9:07 am

There are two standard wheel patterns, autotecknika has both in the boss kit. The issue is more the indicator cancelation. In the galant and lancers they use two roll pins. as for the sigmas and scorpians I am not sure. For my galant I ended up with a Colt one from memory as this would except the correct roll pins and sit at the right place on the steering shaft, the sigma one was not correct. Considering that the car is a very close cousin of the sigma I would expect the sigma one would be the one for you. A reputable parts supplier should have what you need and/or be able to show you the differences between the boss kits.

Good luck.!

Cheers
Image
The way God intended it.....Chrysler for the win :D
User avatar
oldn64
Oldn Rank
 
Posts: 410
Joined: Sun May 09, 2010 5:56 pm
Country: Australia (au)


Return to Work Bench - Scorpion's Space

Who is online

Users browsing this forum: No registered users and 1 guest