repro GE-GH dashpads anyone interested?

This section is for 1976 to 1984 Chrysler/Mitsubishi/Colt/Dodge/Plymouth Scorpion/Lambda/Sapporo/Challenger.

repro GE-GH dashpads anyone interested?

Postby theozsnowman » Sat Jun 07, 2014 1:27 pm

im considering building a mould to allow me to do up a couple of leather skinned top dash pads to fit my scorpions and to help offset the cost im wondering if anyone else would be interested in them?

Once built they would be skinned in stitched leather or vinyl to suit and match the original
My 1980 GH Scorpion Restoration Project - The Oz Snowmans Scorpion - Meet B1 and B2 - The Grey Ghost
User avatar
theozsnowman
 
Posts: 132
Joined: Sun Apr 14, 2013 4:00 pm
Location: Mount Clear Victoria
Country: Australia (au)

Re: repro GE-GH dashpads anyone interested?

Postby bigfoot » Sat Jun 07, 2014 3:37 pm

could be keen on a vinyl one. depending on price/how much it costs to get it this side of the ditch
bigfoot
 
Posts: 20
Joined: Thu Jul 04, 2013 11:27 am
Country: New Zealand (nz)

Re: repro GE-GH dashpads anyone interested?

Postby Superscan811 » Sat Jun 07, 2014 10:47 pm

Depending on the price, I'd be interested in 2.



Cheers.
Superscan811
 
Posts: 1660
Joined: Sun Mar 22, 2009 4:12 pm
Location: Sydney
Country: Australia (au)

Re: repro GE-GH dashpads anyone interested?

Postby theozsnowman » Sun Jun 08, 2014 3:08 pm

yeah price will be determined by the numbers that may be interested as naturally if i can produce more the price can get driven down...
My 1980 GH Scorpion Restoration Project - The Oz Snowmans Scorpion - Meet B1 and B2 - The Grey Ghost
User avatar
theozsnowman
 
Posts: 132
Joined: Sun Apr 14, 2013 4:00 pm
Location: Mount Clear Victoria
Country: Australia (au)

Re: repro GE-GH dashpads anyone interested?

Postby A112H » Tue Jun 10, 2014 6:06 am

Dependent on price on look I would want one, maybe two
A112H
 
Posts: 7679
Joined: Tue Mar 24, 2009 5:01 am
Country: Australia (au)

Re: repro GE-GH dashpads anyone interested?

Postby LukeAussie » Fri Jun 13, 2014 9:34 am

Jason, welcome back!
User avatar
LukeAussie
 
Posts: 352
Joined: Fri May 18, 2012 9:55 am
Location: Adelaide
Country: Australia (au)

Re: repro GE-GH dashpads anyone interested?

Postby BIGDAN » Sat Jun 14, 2014 2:47 pm

Depending on price I need 2 ... but 1 extra for a spare ....
:-)
BIGDAN
 
Posts: 35
Joined: Fri Apr 25, 2014 5:46 pm
Country: Australia (au)

Re: repro GE-GH dashpads anyone interested?

Postby BlueThunder » Sat Jun 14, 2014 7:05 pm

If you could do some LHD LB/LC Lancer Hatchback (Celeste) ones I would take 1 or 2, maybe more...
Image
User avatar
BlueThunder
 
Posts: 334
Joined: Thu Oct 14, 2010 2:18 am
Location: Antwerp
Country: Belgium (be)

Re: repro GE-GH dashpads anyone interested?

Postby Oldfart » Fri Dec 30, 2016 10:56 am

Was there ever anything further with the dash reproductions?
The older I get the better I used to be
Oldfart
 
Posts: 35
Joined: Sat Oct 05, 2013 7:23 pm
Country: Australia (au)

Re: repro GE-GH dashpads anyone interested?

Postby A112H » Sat Dec 31, 2016 11:56 am

As above, still suffering from Scorpion dash over here :$
A112H
 
Posts: 7679
Joined: Tue Mar 24, 2009 5:01 am
Country: Australia (au)

Re: repro GE-GH dashpads anyone interested?

Postby Oldfart » Sun Jan 01, 2017 11:14 am

Might have to see a decent upholster to make up a new top section
The older I get the better I used to be
Oldfart
 
Posts: 35
Joined: Sat Oct 05, 2013 7:23 pm
Country: Australia (au)

Re: repro GE-GH dashpads anyone interested?

Postby webby » Mon Jan 02, 2017 8:33 pm

I'd be keen, depending on price. That's assuming I can make the early dash fit in a GJ, lol
User avatar
webby
 
Posts: 1639
Joined: Thu Apr 02, 2009 10:38 am
Location: Parkes, NSW
Country: Australia (au)

Re: repro GE-GH dashpads anyone interested?

Postby theozsnowman » Wed Jan 25, 2017 6:13 pm

I'm still working on a suitable mould and closed foam base... Looking to get a 3d map done of my good one in a few weeks so I can look to get some inserts done on a cnc...

The internal metal brace and bolt pins is proving to be a bit of a challenge
My 1980 GH Scorpion Restoration Project - The Oz Snowmans Scorpion - Meet B1 and B2 - The Grey Ghost
User avatar
theozsnowman
 
Posts: 132
Joined: Sun Apr 14, 2013 4:00 pm
Location: Mount Clear Victoria
Country: Australia (au)

Re: repro GE-GH dashpads anyone interested?

Postby doofis200 » Fri Mar 31, 2017 6:15 pm

I would definitely be interested in one, depending on price.
User avatar
doofis200
 
Posts: 9
Joined: Thu Aug 25, 2016 6:51 pm
Location: Latrobe Valley, Victoria
Country: Australia (au)

Re: repro GE-GH dashpads anyone interested?

Postby A112H » Sat Apr 01, 2017 12:14 pm

Any movement here snowman?
A112H
 
Posts: 7679
Joined: Tue Mar 24, 2009 5:01 am
Country: Australia (au)

Re: repro GE-GH dashpads anyone interested?

Postby A112H » Thu Apr 27, 2017 10:39 am

Getting very close to needing one here.
Any news?
A112H
 
Posts: 7679
Joined: Tue Mar 24, 2009 5:01 am
Country: Australia (au)


Return to Scorpion's Space

Who is online

Users browsing this forum: No registered users and 1 guest