32/36 or 34ADM???
- letmefknin
- Posts: 167
- Joined: Mon Jun 22, 2009 11:31 pm
- Location: Perth WA
32/36 or 34ADM???
Which is better?
Then what jetting should be used for a stock 2.6 with tuned length extractors and a lil cam?
Then what jetting should be used for a stock 2.6 with tuned length extractors and a lil cam?
Re: 32/36 or 34ADM???
34ADM for sure, as the 32/36 will most likely be off a 2L Escort/Capri and will prolly need jetting up to suit the larger capacity. Use the Mikuni/Solex secondary in the 34ADM and it should be jetted fine for the 2.6 motor.
-Josh.
Daily: 7/96 EF Falcon, 4.0 SOHC, BTR95LE, 3.45:1 LSD/Lukey extractors, full 2.5” exhaust, EL intake, Tickford snorkel, 87DA cam, AU injectors, shiftkits.com.au single stage kit. PB 14.93@91mph.
Project: Red '81 Scorpion-http://www.sigma-galant.com/viewtopic.php?f=46&t=11889
Daily: 7/96 EF Falcon, 4.0 SOHC, BTR95LE, 3.45:1 LSD/Lukey extractors, full 2.5” exhaust, EL intake, Tickford snorkel, 87DA cam, AU injectors, shiftkits.com.au single stage kit. PB 14.93@91mph.
Project: Red '81 Scorpion-http://www.sigma-galant.com/viewtopic.php?f=46&t=11889
-
- Sigma-Galant Police (Global Mod)
- Posts: 1356
- Joined: Thu Mar 26, 2009 8:09 pm
- Location: Hobart Tasmania
Re: 32/36 or 34ADM???
i have has a 34 adm on a 2.6 with cam exhaust head wrk etc all the bulshit and had 89rwkws. dont worry about what jet size, every engine will have different airflow.
BUILT NOT BROUGHT BY ALGIE.
- 81GL
- Sigma-Galant Police (Global Mod)
- Posts: 912
- Joined: Mon Mar 23, 2009 7:27 am
- Location: Mildura Sunraysia Vic
Re: 32/36 or 34ADM???
Yeah go the 34ADM
Have had one running on the 2lt for a while, runs rather well, bitta this bitta that done to the engine as well.
Best idea is to grab an air/fuel gauge, then you can be constantly paranoid about the mix
Nick.
Have had one running on the 2lt for a while, runs rather well, bitta this bitta that done to the engine as well.
Best idea is to grab an air/fuel gauge, then you can be constantly paranoid about the mix
Nick.
Old school Mitsu's, its not a hobby; it's a life style.
- letmefknin
- Posts: 167
- Joined: Mon Jun 22, 2009 11:31 pm
- Location: Perth WA
Re: 32/36 or 34ADM???
Hmmm,
Currently running the 32/36 over jetted. Has bulk bottom end torque.
Guess I'll be trying the 34, just curious about the jetting.
Currently running the 32/36 over jetted. Has bulk bottom end torque.
Guess I'll be trying the 34, just curious about the jetting.
- karl_2ltgc
- Posts: 312
- Joined: Mon Mar 23, 2009 8:38 pm
Re: 32/36 or 34ADM???
There about the same in real world terms, just the 34 is about 15 years newer and has an electric choke which works realy well.
Ive used both.
Ive used both.
- letmefknin
- Posts: 167
- Joined: Mon Jun 22, 2009 11:31 pm
- Location: Perth WA
Re: 32/36 or 34ADM???
Yeah, but the 34 has physically bigger throats......
- karl_2ltgc
- Posts: 312
- Joined: Mon Mar 23, 2009 8:38 pm
Re: 32/36 or 34ADM???
Yea a massive two mil bigger on the primary and a MASSIVE 2 mil SMALLER on the secondaries.
Dosnt mean stuff all as its all still too small for a 2.6.
Dosnt mean stuff all as its all still too small for a 2.6.
- shmickmik23
- Posts: 92
- Joined: Sun Jun 21, 2009 11:23 am
- Location: Sydney
Re: 32/36 or 34ADM???
I have only JUST finished fitting a 34adm to my 2.6 astron 1 GH 5spd and i love it I wasn't expecting anything other then a nice induction sound haha But teh first thing i noticed above anything else was the throttle response. It just wants to revv and keep revving. Then as soon as the secondaries open up you get that throaty roar and *drooollll*
Its not going to win any races but it sure is fun to drive now. Definitely will keep me happy untill i can afford a TS Head/Efi upgrade ;)
Its not going to win any races but it sure is fun to drive now. Definitely will keep me happy untill i can afford a TS Head/Efi upgrade ;)
- letmefknin
- Posts: 167
- Joined: Mon Jun 22, 2009 11:31 pm
- Location: Perth WA
Re: 32/36 or 34ADM???
Well, I think I'll cure the issue with the 48mm side draught I got my hands on......
- shmickmik23
- Posts: 92
- Joined: Sun Jun 21, 2009 11:23 am
- Location: Sydney
Re: 32/36 or 34ADM???
Seriously the 48mm is overated. Havent you seen the new ipods lately?? Smaller is BETTER! I will trade you my 34adm for your 48mm?? hahah
no?
Worth a try
no?
Worth a try
- letmefknin
- Posts: 167
- Joined: Mon Jun 22, 2009 11:31 pm
- Location: Perth WA
Re: 32/36 or 34ADM???
mmmmmm, NOPE!
Re: 32/36 or 34ADM???
did u find one? i hav a 34 adm if you want it
76' GD A57 rebuild Full Album - http://www.facebook.com/album.php?aid=1 ... 29ef74e1d8
- letmefknin
- Posts: 167
- Joined: Mon Jun 22, 2009 11:31 pm
- Location: Perth WA
Re: 32/36 or 34ADM???
Yeah man, got a couple and a 32/36.
Am chasing a side draught 45 or 48mm weber.
Am chasing a side draught 45 or 48mm weber.
Re: 32/36 or 34ADM???
lemme no wen u get the side draft, i should be needin a 32/36 by then ;)
76' GD A57 rebuild Full Album - http://www.facebook.com/album.php?aid=1 ... 29ef74e1d8
Re: 32/36 or 34ADM???
Why do people think a 34ADM is bigger than a 32/36? They are the same total size of 34+2=68 and 32+36=68! If you jet them the same, the 32/36 should have better fuel economy with the primary port of 32 (versus the 34) but the same total. Or am I wrong?
Please click below to visit my blog dedicated to my GE Sigma SE:
http://www.galant-sigma.com
Please click below to visit my cardomain website dedicated to my GE Sigma SE:
http://www.cardomain.com/ride/293989
http://www.galant-sigma.com
Please click below to visit my cardomain website dedicated to my GE Sigma SE:
http://www.cardomain.com/ride/293989
Re: 32/36 or 34ADM???
My old 32/36 performed very well (although this was on my 1600... So this may be useless info )
N/A ALL THE WAY