GC-GD wiring

This section is for 1969 to 1976 Chrysler/Mitsubishi/Plymouth/Dodge/Colt Valiant/Galant/FTO/GTO/Colt/Cricket.
Post Reply
User avatar
Rally_2.6LC
Posts: 954
Joined: Sun Mar 22, 2009 10:59 am
Location: Either under a car, on the computer or in bed...around Ryde

GC-GD wiring

Post by Rally_2.6LC »

Hi guys,

Was wondering if anyone knows if the front half of the wiring looms are the same for the GC/GD Galants?
I'm chasing one for a GC to fix up.

Thanks
Matt
'75 GC daily (slowly dying)
'80 LC 2.6L rally car (generally something broken until 2 weeks before an event)
'71 GA 2.6 Turbo project (i only wanted the diff and got another project)
^This side up^


Formely "Matt"
Scorpma82
Sigma-Galant Police (Global Mod)
Posts: 2119
Joined: Sat Oct 22, 2011 6:48 am
Location: melbourne

Re: GC-GD wiring

Post by Scorpma82 »

Providing they are from the same engine/trans/body combo,

I'd be guessing they are largely the same loom.... U may find differences wirh headlights, horn, washer bottle motor etc.....but very minor difference (if at all)
Built with pride, Driven in anger
User avatar
Rally_2.6LC
Posts: 954
Joined: Sun Mar 22, 2009 10:59 am
Location: Either under a car, on the computer or in bed...around Ryde

Re: GC-GD wiring

Post by Rally_2.6LC »

Thanks for that.
I had a look at a Gregorys service manual and it only has 1 wiring diagram listed, hence the question.
I figured there would be minor differences with the twin headlights but was just putting it out there if someone knew.


Cheers
Matt
'75 GC daily (slowly dying)
'80 LC 2.6L rally car (generally something broken until 2 weeks before an event)
'71 GA 2.6 Turbo project (i only wanted the diff and got another project)
^This side up^


Formely "Matt"
Scorpma82
Sigma-Galant Police (Global Mod)
Posts: 2119
Joined: Sat Oct 22, 2011 6:48 am
Location: melbourne

Re: GC-GD wiring

Post by Scorpma82 »

If the gregorys are only showing one diagram, I'd dare say it's only one loom.....Gregory manuals ate quite good at showing ALL the alternatives
Built with pride, Driven in anger
A112H
Posts: 7681
Joined: Tue Mar 24, 2009 5:01 am

Re: GC-GD wiring

Post by A112H »

One loom suits all. These were only different models in Australia and sold at the same time in Japan.
Post Reply