ITB selection? wanted to buy. Your thoughts!

This section is for 1969 to 1976 Chrysler/Mitsubishi/Plymouth/Dodge/Colt Valiant/Galant/FTO/GTO/Colt/Cricket.
Post Reply
yno26galant
Posts: 217
Joined: Fri Feb 17, 2012 9:39 pm

ITB selection? wanted to buy. Your thoughts!

Post by yno26galant »

Wanted to buy hyabusa itb or just wondering if anyones done this for the 2.6 astron. Or if somone has somthing similar that they want to sell ? Open to anything as the intake side of the are choking my 2.6 astron
simon
Posts: 194
Joined: Thu Aug 02, 2012 5:05 pm
Location: northern tablelands NSW

Re: ITB selection? wanted to buy. Your thoughts!

Post by simon »

You could use ITBs of a Toyota 4age ( the silver top are 42mm and the black top are 45mm ).
I bought a set off a black top to put on a 4g67 ,but have not used them yet
Simon
Mitsiman
Posts: 107
Joined: Sun Oct 04, 2009 5:06 pm
Location: Perth, Western Australia
Contact:

Re: ITB selection? wanted to buy. Your thoughts!

Post by Mitsiman »

Twin DCOE weber manifold with EFI billet throttle bodies - or just go 45 DCOE webers will do everything the same as EFI on the vehicle without the extra expense of going EFI
Racing Performance Works - Mitsubishi Performance Specialists - yes we still work on older cars :)

Check our facebook page for updates - https://www.facebook.com/pages/Racing-P ... 3894620525
User avatar
Rally_2.6LC
Posts: 954
Joined: Sun Mar 22, 2009 10:59 am
Location: Either under a car, on the computer or in bed...around Ryde

Re: ITB selection? wanted to buy. Your thoughts!

Post by Rally_2.6LC »

I have quad carbies from a GSXR750 on a custom manifold made by Superscann811.
Work really well, easy to tune and balance.
Already the right spacing for a 4G32 also.
He has made a set off a GSXR1000 for his 2.6L which was in a Triton, went really well.
I'm pretty sure he has documented them on here also.


Cheers
Matt
'75 GC daily (slowly dying)
'80 LC 2.6L rally car (generally something broken until 2 weeks before an event)
'71 GA 2.6 Turbo project (i only wanted the diff and got another project)
^This side up^


Formely "Matt"
Taz
Posts: 517
Joined: Sun Apr 26, 2015 7:16 pm

Re: ITB selection? wanted to buy. Your thoughts!

Post by Taz »

Id say go for a twin Dellorto 40s or 45s but if the twin manifold is as hard to find as the 4g32 its not really feasable.
Dellorto > Weber all day every day though
A112H
Posts: 7681
Joined: Tue Mar 24, 2009 5:01 am

Re: ITB selection? wanted to buy. Your thoughts!

Post by A112H »

i used two of the three throttle plates from a RB26DETT Skyline engine on a custom fabricated manifold.
I wanted something different and wanted to hide as much of the efi stuff underneath to keep a sort of carby look.
Most poeple think they are carbs until they look closer and start scratching their heads, lol
Image[/img]
Image[/img]
Image[/img]
Image
A112H
Posts: 7681
Joined: Tue Mar 24, 2009 5:01 am

Re: ITB selection? wanted to buy. Your thoughts!

Post by A112H »

Not been here for about a year and guess I did something wrong with the photo uploads, lol
Apparently there is no edit button anymore? Can someone fix the pics for me :thumpsup:
User avatar
Old Colt
Posts: 6
Joined: Tue Mar 24, 2009 11:34 am
Location: Vermont USA
Contact:

Re: ITB selection? wanted to buy. Your thoughts!

Post by Old Colt »

I have done a Busa TB intake, These shots were quite early on.
Image

Image

Image
Regards,
Charlie
Post Reply