Page 1 of 1

Flywheel bolts

Posted: Tue Nov 18, 2014 1:14 pm
by hengagc75
Anyone know where I can find some? Have looked at ARP but they didn't have anything. They're for a five speed galant

Re: Flywheel bolts

Posted: Tue Nov 18, 2014 1:16 pm
by Scorpma82
Another car from a wreckers? (unless ur looking for brand new)

Re: Flywheel bolts

Posted: Tue Nov 18, 2014 1:20 pm
by hengagc75
Preferably brand new.. Don't want to have any troubles and have to pull it all apart again later down the track :\

Re: Flywheel bolts

Posted: Tue Nov 18, 2014 11:08 pm
by smithdavidjames
Try a specialist Nut and Bolt place... I used Bolt Master in Penrith, NSW but they have branches elsewhere I think or just Google or Yellow for your local. Take example bolt with you and they should be able to match thread plus strength, head was a little larger as I remember but if you use/replace all the same bolt weight distribution wont be effected.

Re: Flywheel bolts

Posted: Wed Nov 19, 2014 5:56 am
by mic_77
Toyota 4ag will work out the arp part number and get back to you.

Cheers Mic

Re: Flywheel bolts

Posted: Wed Nov 19, 2014 9:42 am
by hengagc75
Smithdavidjames - I would bring an example bolt but I don't have one :P

Mic_77 - I'm sorry what do you mean by toyota 4ag? Did you mean 4age as in the engine?

Re: Flywheel bolts

Posted: Wed Nov 19, 2014 10:20 am
by Superscan811
If the flywheel bolts are the same as the 4G54,

203-2801 ARP Flywheel Bolt Kit Toyota Celica (8 bolts)



Cheers.

Re: Flywheel bolts

Posted: Thu Nov 20, 2014 12:49 pm
by SIR
I haven't seen galant bolts before but if they are anything like all the rest of 4g mitsubishi motors (cordia, vr4 etc) Mitsubishi 380 bolts are the same and can be purchased new from a dealer

Re: Flywheel bolts

Posted: Thu Nov 20, 2014 3:25 pm
by mic_77
What superscan said they work for the 4g54 just check the thread pitch and diameter on your bolts and look on arp's website you will more then likely find what you need.

Cheers Mic