Page 1 of 1
Ignition Coil setup?
Posted: Fri Feb 21, 2014 1:03 am
by Rizla215
Wondering if anyone could post an image or give insight into the ignition coil setup. I replaced mine with an Accel... I also got a new resistor for it; which I'm hearing may not be necessary....?
Thanks,
B
Re: Ignition Coil setup?
Posted: Fri Feb 21, 2014 1:11 am
by Jordan1249
what sort of engine mate ?
Re: Ignition Coil setup?
Posted: Fri Feb 21, 2014 9:18 am
by LukeAussie
Yep, some more details would be great :-)
True, depending on your coil, you may not need a resistor. Some (many?) coils have sufficient internal resistance, making the external one redundant. Best to double check in the specs of your electrical system (most manuals have this info) what the R is supposed to be, and you can measure using a standard ohmmeter/multimeter. For example, my GC 4G32 has a resistor as standard, but I use a coil with sufficient internal resistance, so don't need the resistor.
Good luck!
Re: Ignition Coil setup?
Posted: Fri Feb 21, 2014 3:53 pm
by RaptorReed