Flywheel bolts

This section is for 1969 to 1976 Chrysler/Mitsubishi/Plymouth/Dodge/Colt Valiant/Galant/FTO/GTO/Colt/Cricket.
Post Reply
hengagc75
Posts: 261
Joined: Wed Aug 29, 2012 2:55 pm

Flywheel bolts

Post by hengagc75 »

Anyone know where I can find some? Have looked at ARP but they didn't have anything. They're for a five speed galant
Scorpma82
Sigma-Galant Police (Global Mod)
Posts: 2119
Joined: Sat Oct 22, 2011 6:48 am
Location: melbourne

Re: Flywheel bolts

Post by Scorpma82 »

Another car from a wreckers? (unless ur looking for brand new)
Built with pride, Driven in anger
hengagc75
Posts: 261
Joined: Wed Aug 29, 2012 2:55 pm

Re: Flywheel bolts

Post by hengagc75 »

Preferably brand new.. Don't want to have any troubles and have to pull it all apart again later down the track :\
smithdavidjames
Posts: 96
Joined: Mon Aug 31, 2009 12:08 pm
Location: Blue Mountains

Re: Flywheel bolts

Post by smithdavidjames »

Try a specialist Nut and Bolt place... I used Bolt Master in Penrith, NSW but they have branches elsewhere I think or just Google or Yellow for your local. Take example bolt with you and they should be able to match thread plus strength, head was a little larger as I remember but if you use/replace all the same bolt weight distribution wont be effected.
mic_77
Posts: 342
Joined: Wed Mar 25, 2009 5:43 pm

Re: Flywheel bolts

Post by mic_77 »

Toyota 4ag will work out the arp part number and get back to you.

Cheers Mic
hengagc75
Posts: 261
Joined: Wed Aug 29, 2012 2:55 pm

Re: Flywheel bolts

Post by hengagc75 »

Smithdavidjames - I would bring an example bolt but I don't have one :P

Mic_77 - I'm sorry what do you mean by toyota 4ag? Did you mean 4age as in the engine?
Superscan811
Posts: 1689
Joined: Sun Mar 22, 2009 4:12 pm
Location: Sydney

Re: Flywheel bolts

Post by Superscan811 »

If the flywheel bolts are the same as the 4G54,

203-2801 ARP Flywheel Bolt Kit Toyota Celica (8 bolts)



Cheers.
User avatar
SIR
Posts: 70
Joined: Wed Mar 25, 2009 2:11 pm
Location: Adelaide

Re: Flywheel bolts

Post by SIR »

I haven't seen galant bolts before but if they are anything like all the rest of 4g mitsubishi motors (cordia, vr4 etc) Mitsubishi 380 bolts are the same and can be purchased new from a dealer
mic_77
Posts: 342
Joined: Wed Mar 25, 2009 5:43 pm

Re: Flywheel bolts

Post by mic_77 »

What superscan said they work for the 4g54 just check the thread pitch and diameter on your bolts and look on arp's website you will more then likely find what you need.

Cheers Mic
Post Reply