Hey guys, looking at swapping my 2.0 auto out of my ge for a 2.6 manual. Just wondering what the difference between the wide block and narrow block is?
Also which one is better?
And which one would bolt straight into my ge?
Would also be interested in swapping diff for rear disc setup.
Thanks in advance
Ge sigma engine swap
-
Sigmaproject
- Posts: 1143
- Joined: Sun Mar 22, 2009 7:11 am
- Location: Maitland NSW
Re: Ge sigma engine swap
Physically the two motors are the same..just that the wide block has a bigger bell-housing bolt patten. Purchase a 2.6 manual complete with clutch/ flywheel/ box/ rear mount/ tailshaft. You will also need the pedal box and clutch cable.
Re: Ge sigma engine swap
Cheers for the reply mate. So would either just bolt straight in? And would there be a specific model of sigma that would have everything including diff that would just all bolt in? And would you recommend wide or narrow?
Re: Ge sigma engine swap
This topic will help you and everyone else.
Ultimate Topic Directory
http://www.sigma-galant.com/viewtopic.p ... 6&p=102281
In particular these topics.
Bolt in RWD Engine Upgrades
http://www.sigma-galant.com/viewtopic.php?f=30&t=2206
Wide or Narrow (Motor or gearbox)?
http://www.sigma-galant.com/viewtopic.php?f=31&t=6424
Identifying: "Jap" or borg Warner box & Wide Vs. Narrow
http://www.sigma-galant.com/viewtopic.php?f=42&t=3569
Ultimate Topic Directory
http://www.sigma-galant.com/viewtopic.p ... 6&p=102281
In particular these topics.
Bolt in RWD Engine Upgrades
http://www.sigma-galant.com/viewtopic.php?f=30&t=2206
Wide or Narrow (Motor or gearbox)?
http://www.sigma-galant.com/viewtopic.php?f=31&t=6424
Identifying: "Jap" or borg Warner box & Wide Vs. Narrow
http://www.sigma-galant.com/viewtopic.php?f=42&t=3569
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers