The balance shafts

[mckenzig]

After you remove the balance shafts what do yo do with them? Has anyone found a sensible use or does someone actually want them?

[cheaterparts]

After you remove the balance shafts what do yo do with them? Has anyone found a sensible use or does someone actually want them?

my scrap guy is paying about $100 per tonne atm you will need more than one set
to make any money out of them though

[81GL]

This is a dilema faced by many

there in the same catagory as; what do you do with the astron 1 head when you can use an astron 2

[larace]

After you remove the balance shafts what do yo do with them? Has anyone found a sensible use or does someone actually want them?

very useful as a "marital aid" for elephants

or weld a few together and put a letterbox on it

or keep it beside the seat in your car for one of "those traffic moments"
but its an engine part "officer" it belongs in the car

[Mr Aerospace]

Well, if you add it to the 20/30 tonnes of scrap metal that used to be cars at my mates place, you'd probably get a reasonable 5c

or...something similar to what larace said...hope you like!

Code: Select all

http://www.foamyfanatics.net/episodes/player.php?title=Hammers+And+Floodlights&file=hammers

http://www.foamyfanatics.net/episodes/p ... le=hammers

[C_Fernance]

I've thought about the floodlights mounted to the back of the car before. Travelling down the F3 freeway everynight you always seem to get retards that don't know how to turn their highbeams off.

[wheelnut]

seeing how far you can throw them is always pretty entertaining,,,, fun for the hole family

[stealth]

use it on the next person that asks
"what sort of datsun is that"
cause i f--ken hate that
cheers stealth

[81GL]

use it on the next person that asks
"what sort of datsun is that"
cause i f--ken hate that
cheers stealth

What a practical idea

[84GKSIG]

could try welding a chain between the 2, highly dangerous nun chucks any one?

[karl_2ltgc]

So you dont just through them in the bin?

Sigma weirdos...

[mistashitty]

Id take mistaking your sigalant for a datsun as a compliment there is NOTHING tougher than a datsun on full song!

[81GL]

Id take mistaking your sigalant for a datsun as a compliment there is NOTHING tougher than a datsun on full song!

You would say that... as it would only take us half throttle to over take the 1200, so your've probably never heard one at full noise ;)

(some fighting words back at ya - fun & games )

[mistashitty]

I supose you sigalastronophiles would say somthing like that (just stick a big MOPAR sticker on the back) but I stand by what I said "there is nothing like a datsun on full song" I`v yet to hear or see a mistu. six on 3x45`s and cam. My datsun sounds pretty damn good (a lot better than my scorp/turbo) but it doesnt set off car alarms like the scorp.
http://www.youtube.com/watch?v=3bBSDez7 ... annel_page
if you look carefully you can see Ms. piggy in the back ground.

[amgis_obrut]

any inline 6 with triple webers sound good, datsun 6's have a god awful sounding valve train

My little 208 holden with triple 48's had a wicked induction roar

As for nothing sounding better than a datto @ full noise, id say tune your ears to a 500+ci ford big block @ 7500rpm you'll find that the datto sounds like nothing

[scorpioncollector]

WELD THEM ALL YOU HAVE TOGETHER AND PUT A LETTERBOX (OR A LIGHT) ON TOP, PUT IT OUT FRONT AND LET THE POSTIE AND THE LOCALS HAVE A GOOD LAUGH.
WHY SHOULD CRANKSHAFT'S HAVE ALL THE GLORY.

[amgis_obrut]

could pass them off as stroker cranks to the rotary guys

[mistashitty]

I`v just had my ears re-tuned http://www.youtube.com/watch?v=fZMPDCNy ... re=related

[amgis_obrut]

I`v just had my ears re-tuned http://www.youtube.com/watch?v=fZMPDCNy ... re=related

What a lovely looking engine

BRM H16