Build up GJ SE Turbo

This section is for 1976 to 1987 Chrysler/Mitsubishi/Colt Galant/Sigma/Lonsdale.
Post Reply
User avatar
SIC082
Posts: 47
Joined: Sun Jun 20, 2010 1:06 pm
Location: Adelaide

Build up GJ SE Turbo

Post by SIC082 »

Image No need for a back seat for racing. Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image
Last edited by SIC082 on Mon Oct 10, 2011 10:58 pm, edited 2 times in total.
User avatar
WagonWheel
Posts: 195
Joined: Sun May 10, 2009 4:53 pm

Re: Build up GJ SE Turbo

Post by WagonWheel »

Looks like its going to be a weapon mate. Any specs on what your going to be running engine/turbo wise?
User avatar
SIC082
Posts: 47
Joined: Sun Jun 20, 2010 1:06 pm
Location: Adelaide

Re: Build up GJ SE Turbo

Post by SIC082 »

ATM its got a pretty standard Astron 1 with 40 thou o/s pistons, removed balance shaft, M8 Magna head, modded TP inlet, XF throttle body, 550cc inj, microtech ecu, think its a GT35/40 (1.26 rear) will have to get smaller exhaust housing. turbo dump with full 3" exhaust, 38mm external gate with screamer.. Will only run about 5-7 psi to start with to protect engine. Hoping for about 150 rwkw to start with.
A112H
Posts: 7681
Joined: Tue Mar 24, 2009 5:01 am

Re: Build up GJ SE Turbo

Post by A112H »

Looking good. 150kw?? It should piss it in, I am hoping for almost that from atmo with carbs, lol
Have you got a fuel pump yet? I have a brand new bosch 910 you can have for $80 with fittings. PM me if ya keen.
Post Reply