GC galant taco
-
Jordan1249
- Posts: 607
- Joined: Mon Jul 01, 2013 6:57 pm
GC galant taco
So after months and months without a tacho i finally replaced the dizzy and rotor button and my tacho started working again then the other day i decided to lower the idle revs when i did so the tacho decided to stop working again ideas what could be ?
Re: GC galant taco
Is the wire on the coil on there good? May have bumped it replacing the dizzy cap, and now it's come loose again?
It's on the negative ( - ) side of the coil
It's on the negative ( - ) side of the coil
N/A ALL THE WAY
-
amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: GC galant taco
Maybe you need a new Taco wiring kit, I got this one of eLbay
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
-
Jordan1249
- Posts: 607
- Joined: Mon Jul 01, 2013 6:57 pm
Re: GC galant taco
Hahah probably works better then mine
had a look at the wire will upload a pic in a sec and show yous
had a look at the wire will upload a pic in a sec and show yous
