flywheel variations help needed

Talk about anything car related here that isn't covered below.

flywheel variations help needed

Postby Frazajay » Thu Dec 07, 2017 3:32 pm

Gday guys.
So i have gone about putting a 4G54 into my lancer that originally came with a 4g32.
I've done it with full efi and haltech , happy to send pics if anyone is interested.
I've hit a snag tho and obviously something i over looked. I used a manual flywheel out of a 2.6 magna and the starter does not engage. I read that there are 106 tooth and 110 tooth, now is this regarding the narrow block flywheels like what im using?
And will i be able to swap my ring gear off my 4g32 onto my magna 4g54 flywheel? Or could i go grab a 6 bolt flywheel off a narrow block rwd 4g63, the older express a narrow i think...

Anyhelp would be much appreciated.
Frazajay
 
Posts: 2
Joined: Mon Mar 21, 2016 8:22 pm
Country: Australia (au)

Re: flywheel variations help needed

Postby Taz » Fri Dec 08, 2017 11:28 pm

What is the starter out of? I would of guessed that same clutch/flywheel and starter out of the same magna would have been correct?? About to do this conversion myself so heres hoping i dont run into this problem, although im a wideblock not narrow so who knows.
Taz
 
Posts: 498
Joined: Sun Apr 26, 2015 7:16 pm
Country: Australia (au)


Return to General/Technical Chat

Who is online

Users browsing this forum: No registered users and 1 guest

cron