Bolted or welded

This section is for Chrysler/Dodge D50, Mitsubishi L200/Triton, Plymouth Arrow Truck

Bolted or welded

Postby lance » Sun Nov 29, 2015 11:09 am

Hi all just a Question .. Early L200 front suspension , dose it all bolt on like Early L300 suspension ?
Starting a new project and am shopping around for a front suspension . L300 if l use it will have to be cut down 100 mm in width .
HR Holden is slightly too wide but will work .L200//// Witch ever one l use will have to have a front mounted rack fitted and would like ford type stud pattern on hubs.
Cheers
lance
 
Posts: 180
Joined: Sun Sep 06, 2009 11:48 am
Location: Melbourne
Country: Australia (au)

Re: Bolted or welded

Postby llgc » Fri Dec 04, 2015 9:23 pm

All L200s have crossmember welded onto the rails so no good for a conversion unfortunately. Also they use a steering box not a rack.
llgc
 
Posts: 130
Joined: Sun Feb 14, 2010 10:09 pm
Country: Australia (au)

Re: Bolted or welded

Postby A112H » Sun Dec 06, 2015 6:42 pm

And are 6 stud not 5x114.3
A112H
 
Posts: 7681
Joined: Tue Mar 24, 2009 5:01 am
Country: Australia (au)

Re: Bolted or welded

Postby Scorpma82 » Wed Dec 09, 2015 12:21 pm

what car u building anyway????
Built with pride, Driven in anger
Scorpma82
Sigma-Galant Police (Global Mod)
 
Posts: 2082
Joined: Sat Oct 22, 2011 6:48 am
Location: melbourne
Country: Australia (au)

Re: Bolted or welded

Postby lance » Wed Dec 09, 2015 5:02 pm

All l will say Scorpman is that it is old .
Will put up some pics when it gets under way Have it stored under my little carport out back .
A mate has a Fiat 850 sport stored in his garage since 1985 He is too old to restore it himself
If l can get that l will drop the mystery car for that. BUT BEFORE THEN
lots Jobs to be done around the house and a bigger garage
lance
 
Posts: 180
Joined: Sun Sep 06, 2009 11:48 am
Location: Melbourne
Country: Australia (au)

Re: Bolted or welded

Postby kalgarkis » Wed Dec 09, 2015 7:52 pm

Hey A112H, I'm trying to message you. How do I do that? Kal
kalgarkis
 
Posts: 1
Joined: Tue Dec 08, 2015 5:35 pm
Country: Australia (au)

Re: Bolted or welded

Postby A112H » Thu Dec 10, 2015 6:20 pm

Click the PM button under my name.

Image
A112H
 
Posts: 7681
Joined: Tue Mar 24, 2009 5:01 am
Country: Australia (au)


Return to Ute's Utopia

Who is online

Users browsing this forum: No registered users and 1 guest