Budget l200 turbo build

This section is for Chrysler/Dodge D50, Mitsubishi L200/Triton, Plymouth Arrow Truck
Post Reply
turbol200
Posts: 264
Joined: Fri Jul 09, 2010 3:52 pm

Budget l200 turbo build

Post by turbol200 »

so iv been gathering bits to efi and turbo my l200 ute, (thought id put up a build post) its a budget build, its got a 4g63 carby, the carby has seen better days, I had most of the bits sitting around to do the conversion just need a few bits extra, im just bolting all the starion gear onto the ute engine and going to run standard boost and premium fuel and drive it, the ute is ruff and does have rust hence the budget build and not going with after market ecu and manifold, I have another ute that is back in the build that has all the good stuff, starion engine, mpi manifold, big custom front mount,evo 8 injectors, wolf 3d plus (was the latest and greatest when it went in)
spoto a 57 chev


...a 57 2 door
turbol200
Posts: 264
Joined: Fri Jul 09, 2010 3:52 pm

Re: Budget l200 turbo build

Post by turbol200 »

<a href="https://ibb.co/cPxE6d"><img src="https://thumb.ibb.co/cPxE6d/20170613_132029.jpg" alt="20170613_132029" border="0"></a> <a href="https://ibb.co/eJ4SRd"><img src="https://thumb.ibb.co/eJ4SRd/20170911_163557.jpg" alt="20170911_163557" border="0"></a> <a href="https://ibb.co/bQh8XJ"><img src="https://thumb.ibb.co/bQh8XJ/20180620_143500.jpg" alt="20180620_143500" border="0"></a> <a href="https://ibb.co/g9joXJ"><img src="https://thumb.ibb.co/g9joXJ/20180622_112405.jpg" alt="20180622_112405" border="0"></a> <a href="https://ibb.co/isfCsJ"><img src="https://thumb.ibb.co/isfCsJ/20180622_114107.jpg" alt="20180622_114107" border="0"></a> <a href="https://ibb.co/cuoyXJ"><img src="https://thumb.ibb.co/cuoyXJ/20180622_122128.jpg" alt="20180622_122128" border="0"></a> <a href="https://ibb.co/iYBP6d"><img src="https://thumb.ibb.co/iYBP6d/20180622_122134.jpg" alt="20180622_122134" border="0"></a> <a href="https://ibb.co/bEmfey"><img src="https://thumb.ibb.co/bEmfey/20180622_122137.jpg" alt="20180622_122137" border="0"></a> <a href="https://ibb.co/dO1Dzy"><img src="https://thumb.ibb.co/dO1Dzy/Inked20180620_143628_LI.jpg" alt="Inked20180620_143628_LI" border="0"></a>
spoto a 57 chev


...a 57 2 door
turbol200
Posts: 264
Joined: Fri Jul 09, 2010 3:52 pm

Re: Budget l200 turbo build

Post by turbol200 »

and as it turns out im shit with this posting pictures thing sorry
spoto a 57 chev


...a 57 2 door
71GA
Posts: 84
Joined: Tue Jun 14, 2011 8:35 pm
Location: Lyndoch, SA

Re: Budget l200 turbo build

Post by 71GA »

Looks good keep us posted.
turbol200
Posts: 264
Joined: Fri Jul 09, 2010 3:52 pm

Re: Budget l200 turbo build

Post by turbol200 »

I mounted 2 fuel pumps for it today. Just using a lift pump and a vl commodore high pressure pump . I removed the inner gaurd panel near the fuel filler and bolted them to it. Close to the factory lines and is protected from dirt and rocks ect. Will post pics soon
spoto a 57 chev


...a 57 2 door
Post Reply