Sigma-galant.com

something like what was designed here

http://www.sigma-galant.com/viewtopic.p ... irt#p30238

I am still very keen for a shirt. Something black or white, short sleeved, printing on the chest and the sleeve preferably that cartoony picture of the galant and scorpion on it across the chest, maybe sigma-galant.com across the back, maybe the mitsu and chrysler badges on the sleeves. They are jus...

the colour looks like candy apple red to me, it's what I had on my old hardtop before it was stolen

Yea, I wasn't suggesting doing what I did as your first option I was just noting it is a possible cause as I had it happen to me.

Definitely start at the lights first and make your way back

I take offense to that, I was just saying the head has to come off either way so just take it off already, you can't see the damage until it's off and there is no way to fix it without taking it off. You or him have nothing to lose as the car isn't running anyway, once you take the head off you will...

I have a leak in my heater core somewhere and this happens to me and I am assuming for now it is condensation from the leaking core

I have seen it done on other cars but I do not know how and they weren't too bright as to annoy other motorists, a lot of standard cars these days have intense normal driving lights, a friends subaru with standard lights is so bright that it blinds you

in the galant it wasn't too bad, have to take the steering column apart. Just make sure you put the steering wheel back on straight unlike me LOL

lol yea I had them in my old hardtop

yea this was in the ebay thread before, he is definitely a dreamer. I like how it says it's "original" when hardly anything on the car is besides maybe the paint and the motor. I hope he is on the site so he can explain himself lol

I had this problem in my galant and the first thing I did was check all the fuses, next I checked the dipper switch thing on the blinker stalk and it turned out the contacts had worn down and weren't touching any more, I just bent them until they touched again and now it's fine

no one?

I suggest you stop piss farting around and hoping someone on here is going to solve all of your problems for you and just take the head off, what do you have to lose by doing it? It's not that hard pull apart and see, either way it needs to happen anyway.

Ok then, I just noticed one of my sealed beams has blown and I have been looking at converting to H4's for a while now and maybe also converting to HID's. So a few questions, I can source the parts but I was just wondering if it's possible/legal to have dual filament globes in all the headlights and...

I find the problem buying rims for our cars is the offset, I have found plenty of rims in the right pcd and bore size, but they are like +40ish offset

Yea I know how you feel kenvv, if I had a garage my life would be much easier >_< if I had working space this car wouldn't be on the road at the moment, I would be doing a complete ground up resto on the body replacing every nut and bolt, so I am just going to pay someone to do it :P shame about the...

LOL, the previous owner was quite dodgy and I have spent countless hours fixing his work. Nice guy though hahaha, it's not very clean in person, needs rust fixed and a respray pretty urgently as the paint has become thin and I have surface rust coming through the paint

the guys name is robert elliot, his number is 0403 328 574 he is from blacktown way I think. He came to my house and did it for me

lol another galant in better condition

I can't stand shitters >_< if I had another car it would have to be better then the galant, and anything that I deem better then the galant will cost a lot of money lol

also has anyone converted a galant or lancer to hydraulic clutch before? details would be nice

904 out of a scorpion is narrow block patterm so yes it would bolt up to an early series 4g63 (evo 1-3, vr4 or rvr)

Okie dokie, I just spoke to a guy from diff trans about a hilux conversion and not only has the price gone up to $2900 from $2700 since I last spoke to them, but now they want me to supply the lsd diff centre, the brakes and it's going to take them 3 weeks to do it >_< unless I can supply them with ...

I wish I had a garage I do all of my work in the driveway or someone else's garage when I am allowed to

www.austrackmotorsport.com.au

My dad's mate, he has built some incredible weapons over the years and he will be doing my motor when he gets around to it.

Tefba made me a set for about $100, I just supplied him with one original and he copied it

BINGO, I was going to suggest the same thing

the one's talking lowly of the astron obviously have no idea what they are talking about. it might depend on what series and model astron you have too, when I pulled apart my astron 2 (out of a gj scorp) I noted that there wasn't much room between the valves and the pistons as I was contemplating le...

yes, I am pretty sure they are interference

tefba doesn't "have" them, but he can make you some like he did for me