Sigma-galant.com

Have had a bit of time over the holidays to work on the galant and going well. Put the 2.6 in with the gearbox attached only to find the the 5 speed bw just didnt want to be in there. So sourced a scorp jap 5 Speed (thanks Shaun), got that in after much frustration under the car :banh: So now i am a...

Hey Guys, About 6 months ago i scored a 4g54 astron II for $200. I have since partly fitted this into my GB and am just upto doing the Brakes and suspension. With the engine, i got some other bits such as, front strut and brake assembly, Rear axles with hub and discs, Rear calipers and all the steer...

Do most people change the battery in from sigma for this conversion? If so, can someone tell me what type it is? Cheers

Hey guys, I managed to pick up a whole heap of gk gear when i bought the astron, I couldnt find any posts regarding the fitting of crossmember and struts, so i thought i would give it a go. Found that the crossmember is too wide to fit so no bolt in there. Therefore the struts won't fit without alot...

Well has been a busy start to the year but managed to find some time to work on the GB. Had a water leak in the head gasket so we redid that...only to end up with a major oil leak at the back of the engine. So trawling the FS section i found some one selling a heap of gear out of a gk. Picked up a 2...

anything for a 4g32 on sale, possibly extractors, cam etc?

progress is looking great Phil =)
quick question, what is that dash out of? And is it bolt in or some mods required?

so been a while since i have updated but not much has happened through the year as we have been pretty busy. We have done a little bit of work on the head, valve regrin d, head gasket, valve stem seals, valve regrind. Also just recently replaced the solex with a holley 180 but yet to tune it properl...

Cheers for the info mate. I am gonna give it a go myself. Im not looking for a perfect tune just yet as i am planning on extractors and exhaust upgrade as well as possibly electronic ignition and dizzy. Gonna grab some smaller jets as i am pretty sure it came off a 2litre. Will let you know how i go...

Hey Guys, i Just installed a holley 180 in my 1600 saturn but is running quite bad. Seems to be bogging down alot when accelerating and running quite erratically. i found a thread in another forum saying that the Holley 180 doesnt run too well with over 3.2 psi fuel pressure and the manual says that...

Hey Guys, I posted this in galants garage with no luck so i thought id try here. I was just wondering if any one can tell me where the wire for the temp sensor on the 4g32 chain drive comes off the loom? i noticed that my engine is getting quite hot but the gauge wasnt going up, i checked the sensor...

Hey Guys, I was just wondering if any one can tell me where the wire for the temp sensor on the 4g32 chain drive comes off the loom? i noticed that my engine is getting quite hot but the gauge wasnt going up, i checked the sensor and nothing is attached. look all around and i cant find a wire to go ...

Next year i am looking at racing my GB Galant in A class which is 1600 and under (Non Turbo). I was wondering if there were any engine swaps i could do for a later model 1600 engine that wouldn't be to difficult or need engineering? Or would i be better sticking with the 4g32 and upgrading that? Che...

Finally got to brissy last week. The galant arrives on Thursday then hopefully we will do a bit of an overhaul on the engine in the next few weeks.

Was wondering two things, What do people recommend we should replace ie, Gaskets, Seals, studs etc and what brands/suppliers would you recommend?

Hey guys,

I'm moving up to sunny Bris Vegas at the start of next year. Just wondering if anyone
can recommended a Cams affiliated Car club that i will be able to do track days in my GB Galant.

Cheers
Danny

The plan is to get her to a standard that i can do track days and sprints. First up though we need to do the head gasket as i am pretty sure it is blown at the back. was thinking about doing a valve regrind while i was at it. Discovered that it actually has a 4G32 in it so i want to run with that an...

Thanks for the info guys.
So i'm guessing the only real way i will be able to tell what model the engine is from is by checking what kind of cam it has?
pretty sure there is no pollution gear on it but can't be sure because i'n not that familiar with it.

Cheers Dan

hey guys. i have searched forum and the net but can't find an answer to this question. i recently bought a 74 gb galant which has a 1400 badge on it. i looked through the servicing book and noticed that they did an engine change in 2000. so i got under the car and had a look and seen that the engine...

Thanks guys :D Unfortunately its not registered Dave. Propbably wont be until we get to Qld so no good for a cruise sorry mate. here are a few pics of the old girl anyways. http://i1195.photobucket.com/albums/aa400/turtlegrip/galant2.jpg http://i1195.photobucket.com/albums/aa400/turtlegrip/galant1.j...

my name is danny and i am currently living in west Ryde but moving to brissy in jan next year. recently my wife and i bought a 74 gb galant with a 1400 badge on it which is our first project car for either of us. our intent is to slowly build it up as a track car. i have been trawling the site for a...