Sigma-galant.com

Update!

Got her running and... Some dopey bugger mixed up a water hose to a vacuum port on intake runner #4 so she copped a belly full of water and spewed water out the gasket!

Hopefully no damage was done and all is well... The joys of finishing someone else's projects

IMO... Buy this.. Crane Cams Fireball XR3000 electronic ignition. Found on eBay for about $150. You will need a different coil (crane cams PS91 coil). What it does is increase the strength of your spark, and the also the amount of spark... You remove the guts of the dizzy, and replace it all with an...

Straight. Minus a dent on the rear left corner. And a small dent on the left front...

A plus side though? She has BOTH eyebrows! :O lol

There's a little bit of shity rust here and there. But really not too bad

Got the head on and torqued up, painted the rocker cover and Installed a few other bits (alternator, radiator etc). Also put the last piece of exterior on :) the grille https://fbcdn-photos-e-a.akamaihd.net/hphotos-ak-prn1/t1.0-0/10256328_837199189629908_957098768057979366_n.jpg Here's my purdy rock...

Not sure...

But yea I'm glad I got it now the partner is still pissed.. But meh

took me a while, but I got it in the end

Got the head on, just done the bolts up firm. I need torque specs and sequences

Here's B2 :P https://fbcdn-photos-d-a.akamaihd.net/hphotos-ak-frc3/t1.0-0/10153110_836570043026156_2537479943162936491_n.jpg Formerly known as davenq's I think :P Runs a 2.6 and a 5 speed, deleted balance shafts, 20thou over (0.50 on the tops), and some gh struts/brakes. Plan is to throw her togethe...

Pete has done the same in his GA. jut used gh struts/brakes with no booster. Passed no dramas

PORN!

I'd do this, if I could run the trim rings also.. Could always widen them but keep the same front spacing...

More to come now... NOW DAMN YOU!!! haha

:D cheers mate!! Comments like yours makes it worth just a little more of my time :) I make more things shiney today!! :D Before http://photos-h.ak.fbcdn.net/hphotos-ak-prn1/t1.0-0/10168013_831425526873941_284975603122653053_n.jpg After :D http://photos-f.ak.fbcdn.net/hphotos-ak-frc1/v/t1.0-0/101736...

Fair enough

Thanks for that

So can I use the 25a wire from the head?

Got it guys! :D fired her up last night I used a really big gauge cable from the battery straight to the block (running it under the battery tray and into the loom so it stays tidy and minimalises movement). Then got some 25a wire from the terminal to the body (again, running into the loom for tidin...

Yea I've seen the rest the same as that... I'm pretty sure mine was just straight to the block, and another wire from the terminal to the body

If I could go straight to my block (It's the same as the astron), I'm wondering why most cars are from the battery to the body, then to the block? Does it benefit me in any way at all? And can I actually go STRAIGHT to the block? I'm more it less asking for someone who has a working car, (preferably...

Mint! Cheers brah

Nah, I pulled it all apart for the respray, now I've got back to putting it together, I forgot what I assumed I wouldn't typical!

Where does the earth lead from the battery go?! I forgot

Battery --> body

Body --> ???

Cheers

Fine haha

I'll have to go buy kmac's then

If you're interested in selling the tops. Text me a pic of them and stuffs

haha 75 wagon funny you should say that because I was thinking the same thing. im still kinda getting used to it as that was the last thing I did on it. You had to unpick the headlight buckets and move them in 50mm closer together didn't you? Yes I have one of those grills, but it's sitting in the ...

Go to an auto parts store with your bulbs. Tell them you want led replacements. Get the code for the bulbs and eBay that shit ;)

Did you make that badge? :O

:lol: They do need new tyres ;-) And I actually want the stock wheels as I'm gonna run those until I save up enough for my new wheels :) Work meister CR01 16x8 +10 fronts, 16x8 -3 rears. And khumo KU39 195 or 205/45r16 $2300 for wheels, roughly $600-$800 in tyres... Until then, I'll run her in stock...

Pre 75 jap spec?

My lights are a 3 way flick up/centre/down switch on the dash under the fuel gauge area. Down is off, up one is parkers. And all the way is low beam. Pull back on the indicator stalk and you have high beam.

If you're answer is yes to my first question, ignore my comment

No! Lol... Later

Cheers Jase!

So... No start up today :( Lost my top rad hose.. And got my head all messed up with wiring.. On a bright note, the gearbox is all bolted up properly and got the carbs bolted in, extractors bolted on ad the fuel lines sorted :) Just need the top rad hose and get my head around shit, then I can get h...

My gb has none of it. No hole, no bung. Nada

I know a vr4 bolts directly into a first gen excel.. Using some evo parts...