Search found 190 matches
- Wed Jun 03, 2009 10:59 am
- Forum: Engine
- Topic: 4G63T into sigma?
- Replies: 17
- Views: 4601
Re: 4G63T into sigma?
Only see a few evo 4+ in rwd, as the bell to block is completely different - http://projectzerog.com/forum/viewtopic.php?t=1348 - Make an adapter plate or wait till Bill makes a bell for it. Evo coilovers/brakes - not much point as AWD - but if you can make a set of dog bones to fit the calipers - w...
- Thu May 07, 2009 5:23 pm
- Forum: Sigma's Section
- Topic: Looking For Info / Pictures
- Replies: 14
- Views: 1973
Re: Looking For Info / Pictures
have irs? and digital dash?
borg warner box throws me a bit - should be a jap box - unless it was used as an easy fix at some point.
borg warner box throws me a bit - should be a jap box - unless it was used as an easy fix at some point.
- Wed May 06, 2009 3:17 pm
- Forum: Electrical/Audio
- Topic: Microtech LT-8
- Replies: 8
- Views: 1622
Re: Microtech LT-8
Add to that - a re-configure cost $400.
The other option is to run all the sensors from the engine it came off - water / temp easy - crank / cam trigger, may be a bit of stuf'n around.
The other option is to run all the sensors from the engine it came off - water / temp easy - crank / cam trigger, may be a bit of stuf'n around.
- Sun Apr 12, 2009 12:05 am
- Forum: Suspension/Brakes/Wheels
- Topic: R31 front struts on a Sigma
- Replies: 54
- Views: 17107
Re: R31 front struts on a Sigma
s13 do, there in the GH - the GK is getting s14 5 stud
- Wed Apr 01, 2009 12:43 pm
- Forum: Sigma's Section
- Topic: VR4 engine into Sigma
- Replies: 22
- Views: 6205
Re: VR4 engine into Sigma
Any narrow bell should fit - BW or Jap. But I would go Supra at a minimum - http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=170297635125&viewitem= Like the idea of the T56 - http://projectzerog.com/forum/viewtopic.php?t=689&postdays=0&postorder=asc&start=250 Or the ...
- Wed Apr 01, 2009 6:33 am
- Forum: Sigma's Section
- Topic: VR4 engine into Sigma
- Replies: 22
- Views: 6205
Re: VR4 engine into Sigma
Anybody??? I thought you used starion mounts - I've not done the convertion but it were I would be looking SOHC 4g63 engine mounts. yep - starion / L300 - anything SOHC 4g63 rwd should work. I'm using L300, original I did just mod the sigma mounts, but that would be another thing an engineer would ...
- Sun Mar 29, 2009 6:25 pm
- Forum: Suspension/Brakes/Wheels
- Topic: R31 front struts on a Sigma
- Replies: 54
- Views: 17107
Re: R31 front struts on a Sigma
nope - the sigma ball joint is to thin.Cottees wrote:The ball joint on the Sigma control arm might also bolt to the S13 Knuckle Spindle.
s13 spindle with sigma ball joint. - http://www.walkercorp.ath.cx/brakes/IMAGE_00045.jpg
- Sun Mar 29, 2009 12:44 pm
- Forum: Suspension/Brakes/Wheels
- Topic: R31 front struts on a Sigma
- Replies: 54
- Views: 17107
Re: R31 front struts on a Sigma
Don't know if the r31 lower arm's are the same - but the s13/s14 arm's fit - just remove the bush - press in a sigma bush - same size in the arm's.
As for the strut tops - K-mac can make any top PDC with any bearing ID for the shock.
As for the strut tops - K-mac can make any top PDC with any bearing ID for the shock.
- Sat Mar 28, 2009 2:29 pm
- Forum: Events » Event Photo Album » Cruise Register
- Topic: NSW Members
- Replies: 33
- Views: 6904
Re: NSW Members
.... Dapto
- Sat Mar 28, 2009 9:38 am
- Forum: Sigma's Section
- Topic: VR4 engine into Sigma
- Replies: 22
- Views: 6205
Re: VR4 engine into Sigma
First post - :D SOHC 4g63 engine mounts. Swap the TB. http://www.jayracing.com/ Get the Alternator Relocation and Front Water Outlet Kit - makes things easy - or mod the thermostat housing at the back of the head. ( I'm doing both ) - will need an under drive kit on the water pump/crank or extend th...