Sigma-galant.com

just woundering if the red interior in the galant pic's iv seen on here are factory, or factory colour, id love a red interior for my gd wagon, is it rare to find, im thinking if iv gota paint it all id find a set of red starion front seats for it, as it would be a shame to fuck with galant seats wi...

where bout does it bolt to ? Through the rear floor. I've also got another one that is welded to the inside of the rear bumper brackets and hidden under the rear bar (much tidier set up, well, less obvious anyway). I'll see if I can dig through my shed and find what I can take photos of. If I haven...

A112H wrote:The car?

lol i know that, iv seen a few ways tho thats all iv seen some bolt to the rear bumper mounts, some just to the floor and some come off the rear spring hangers whats the best, the floor

i ssen your pics mate, where bout does it bolt to ?

im keen to make a tow bar for my gd wagon,iv got an idea how to go about it, im thinkn some rhs along the rear just under the back with 2 plates that go to the rear bumper brackets and two bits that go back just past the tank and bolt to the floor with plates on the other side, i cant see anything w...

cheers mate late is beter than never

heres the pic mate

to easy ill grab a pic mate

hi im sure this has been in here before but with a quick look i couldnt find any thing, is there any way i can tell if i have a ROUND or SQUARE port 4g32 with out pulling the manifold off the engine, its a chain drive engine if that helps, i might be on to some extractors for the wagon thats all, an...

C_Fernance wrote:I know of at least 1 4g32 running twin weber style injection, looked like the Injection Perfection kit. Didn't get to hear it though as it was still being wired up.

yer that would look sweet as, cost a bit for them setups tho, wounder why they went down that path

i am also intested in rear disc brakes, the thought of a l200 diff in a galant has crossed my mind as i have one and they are strong as

they are a nice sounding donk, has any one put injection on one ??? i havent looked into it or thought about it to much just woundering

id be keen man just gota work out what size i need and ill get back to ya

i may be interested mate, are ya lookin to get rid of em right away ?, ill have to pull down the donk ill buld and see what slugs it has in it, im still up in the air bout na build or small boost build, i know that a stock 2.6 is better than worked 1600 but who cares lol what kinda coin ya after for...

500,000 miles on my 1500 GA before I decided it was smoking too much and retired it. T. i must say that is a good effort for the little 1600, must of been looked after its whole life, i seem to like the saturn 1600 donk, betwen a 4g32 that had the ringer run out of it and a corona that had been loo...

Had a friend who owned a Galant back in the 70's, the story goes he blew 2 pistons and it kept running for 2 weeks until he saved enough money to buy a new motor (again a 1.6) Mine has been thrashed by me for close to 5 years with only servicing needing. Its down on compression in all cylinders and...

HAHA thats the way (back to the holden 6 thing) we had one that got boiled all the time, got so hot it would stop, we used to put oil in it when we got sick of hearing it rattle, are the saturn donks still reliable once ya start tryn to get some more power out of them

just woundering how much a saturn engine can take, not as in how much boost before it will pop or any thing like that, how much abuse have you given to em and they lasted, iv spoken to many people and they say the motors just seem to go forever like an old holden 6, eg how long have you negected one...

thats it, and one thing is every body looks at em like a 253 holden v8 a boat anchor, there not that bad lol haha dont get me wrong a 253 is good if ya know what ya doin wiv em, im thinkn they are cheap to buy complete(4g32 hat is, so who cares if ya f#@k a few of em geting things right, i was runni...

i am also intested in this, i am toying with idea of one on a 4g32, before every body blasts me, all i have to say is 4agze i had one in a ta22 silly car, i know they are twin cam, have fuel injection and come boosted from the factory, they make good numbers from the factory, they only thing im comp...

thanks for that man, ill try them out and let you guys know, so every body knows how to go about it

so i decided i wanted to put the cd player in the dash of my wagon, i didnt want to cut up a good dash so i used one i had layn about that had a hole drilled in it for a switch, black looks beter than the wood grain so i got all of that shit of but am having trouble geting the glue off it, has any o...

my cordia turbo one is like the one in the pic above

id get one of those done they are good, id do one for all my cars

iv got a 4g52 lined up to slot in to my gd wagon, cause i cant help my self, im thinkin injection needs to be hanging off the head, iv been reading about it alot of pepole are using magna heads and manifolds, wouldnt a head and injection setup off a pajero be easyer to slap on, wiring in the right d...

is there any way to tell a narrow block from a wide block, theres a sigma wagon for sale cheap near where i live, it says 2.6 4spd, keen to know what it is, if its narrow il drop the donk in my galant wagon, as i have a 5 speed in it all ready and have a spare one, can ya work it out by the engine n...

thats what has been done on my wagon lol, but dont wana have to move my hand so far from the wheel sorta thing, so there for the spacer thing

oh yer lol now i seen the pic i remembered the gearbox end moves the same

thats what i had in mind for it, the only thing i was thinking a bout was would the shifter hit the spacer if it was made to high ? if ya know what i mean

has any one had a go at making some spacers up and moving the pivot on a jap 5 speed gear stick to give it a shorter throw ?