Sigma-galant.com

Whats your email I will send you some pics.
I also have a set in my spare shell.


Cheers
Matt

Loving all the rally spec Lancers


Matt

@JimmyG
Is that to suit an 8 bolt diff? Would it suit GC?
If no response from Lumley93 I would be very thankful to use that in my GC touring car.


Cheers
Matt

From what I have been told and understand, No (in a nut shell).
I looked at this option, however aftermarket computer is pretty much a must.


Cheers
Matt

I know people who have used air lockers in rally cars and they work quite well. Car wasn't a Galant though and not sure of running gear.
I have a shortened Hilux LSD in my LC with 3.475:1 ratio, works a pearl, and exceptionally strong, only problem is a bit more heavy.


Cheers
Matt

I just had a look under mine. I cannot see the two extra bolt holes you describe.
I have the rubber stopper just above the diff, but no other bolt holes. There is a single hole that goes through the floor, where the wiring for the fuel gauge go through but that is it.


Cheers
Matt

Just found this thread (dont check here much) and this is fantastic. Few questions (might have read over them and missed it) 1 - What rear suspension arm setup are you running? Leafs, 4 link, 5 link, panard rod, watts link? 2 - How much are the front MCA's setting you back? I'm looking at getting Bi...

That will be a 1977 model, or the LB hatch that we got here.
Can tell by slightly different hatch (glass a bit smaller) and the bumpers.

Interesting to see these things can still wow.



Matt

Hey guys, I'm looking into building a 4g63 rwd track car. I want to keep it simple and relatively cheap (ie stock engine/ecu). However few places I have seen different engines/manifolds for sale and some are top mount turbo's and some are bottom. I know factory is bottom mount, was just wondering if...

Stick bumper on, enter can of expanding foam, fill ends, use knife to shape, cover in bog or fiberglass and paint
Just food for thought.....


Matt

One would assume it is probably the same gearbox from the Galant's if it is a factory Auto LC.
I have no proof of this but assuming it as they were both 4G32's.


Cheers
Matt

Ill be at a rally with my beast on the 23rd, but will try and make it back for part of the cruise (maybe about lunch time) on the Sunday.
It will most likely not be in show and shine condition. But still hot to look at/listen.


Cheers
Matt

Im keen for an event too. Sundays are best for me and just not the 23rd (car will be at a rally) or the 31st (Easter). Wisemans was good, maybe something past windsor along putty road. But no defined end point along here as it loops all the way to Broke and Cessnock... Or even Windsor Maccas meet, t...

What engine is that LA running?
Note: Exhaust out passenger side.


Matt

How did you go with this?
Im looking for an electronic ignition module of some sort. Had a JayCar kit in there for the last 3 years but then my friend accidentally shorted it out when he rewired the car
Standard points have been playing up ever since.


Cheers Matt

Never heard of this conversion before.
Will be interested to see how it pans out.
Are the S13 parts (hubs/brakes) similar to the s14 or s15?


Matt

Guess thats a no then. Was looking at CAMS regs, and apparently my cage doesnt comply now, so cant get a log book. Only got a single diagonal brace on the main hoop, and now you need a cross. But trying to get car engineered so not sure if cross will hinder my chances. Need to talk to engineer, if i...

Doesnt bother me with which way the intake/exhaust is.
Interested in them as a whole.
Might go VR-4 as they are cheaper, and if much of muchness I can just get it retuned if I feel the need for more power.


Cheers Matt

Thankyou muchly Jason.....might stick the Galant on a set of scales to see what it really weighs.


Cheers Matt

Thanking you very much Dave.
Do you do CAMS rallies or some AMSAG ones too?
Im hoping to do a whole season of AMSAG in 2013 in my LC, just wondering if I may see some other classic Mitsubishi's


Cheers Matt

More coats of clear will never hurt. I painted my car and got 4 cans of pressure pack primer, then used about 2L of white, 1L of black, 500ml red and 100ml of silver. Put at least 4 coats of clear over that and it was about 2L. Last coat is thinned down quite a bit (at panel beaters advice) to give ...

A lot of people will probably disagree but personally I like Sienna Metallic (or shiny s*** brown as I call it).


Cheers Matt

I put GH LCA's on my LC and then got the tie rod adjuster from it to suit. I noticed that the GH adjusters were 20mm longer than my LC ones. However I needed 2 cars as they only had one long one per car. They were 130mm as opposed to the 110mm of my LC or GC ones. (plus the nut on either end) Had th...

Sorry probably should have been a bit more clear, wasnt just refering to up to evo 3, but more like up to probably 6 (9 pushing my budget a bit for what I want).
I suppose what im trying to ask is VR-4 much different from Evo?


Cheers Matt

Hey guys, this is sorta a overall question but thought I would put it here. Researching difference between Evo's and VR-4's, without going into everything about them the main difference I can find between them is the power difference between them. VR-4's made around 177kw (6th Generation) and Evos a...

Which motorkhana is on this sat?
I wasnt going to the one on the 11th as was at a bucks weekend. Would have been good to get the LC or GC out there again.


Cheers Matt

Thanks heaps for that Dave.
Does it have the official weight (wondering how much this differs to the actual weight).


Cheers Matt

Awesome mate, thanks heaps for that. Quite comprehensive. Still not sure if I would use a 2 or 4 door for this....I know which would be easier to get parts for, but it will be an expensive build so wondering if I put the extra $$ into it for a bit more class. Out of interest, is there any difference...

Hi guys was just wondering if some people could do me a favour. I wanted to know if the wheel base of LA 4 doors were the same as the 2 doors? Would assume so but wondering if someone could please check, unfortunatly I dont have either to compare it to, only wikipedia (but wanted to check with real ...