Search found 154 matches

by HEMI26
Sun Dec 26, 2010 12:09 pm
Forum: Members Rides
Topic: TVM006's GK GSR
Replies: 86
Views: 30835

Re: TVM006's GK GSR

hey man i was gunna ask how the exhaust was going did ya get the pacy's painted yet (H)
by HEMI26
Tue Dec 21, 2010 5:52 pm
Forum: Builds
Topic: PROJECT V6 SIGMA (NOW PROJECT V8 SIGMA)
Replies: 128
Views: 34116

Re: PROJECT V6 SIGMA (UPDATE>>)

sorry man cant help ya out wit that 1 :think: you'll have to suss it out
by HEMI26
Mon Dec 20, 2010 10:58 pm
Forum: Builds
Topic: PROJECT V6 SIGMA (NOW PROJECT V8 SIGMA)
Replies: 128
Views: 34116

Re: PROJECT V6 SIGMA (UPDATE>>)

hey man this is wat i found out

VB to VK sedan are 58.75inches wagons are 59.75inches VL are 59.5inches and the vn is 20mm wider each side than the vl

hope this helps dave :thumpsup:
by HEMI26
Sun Dec 19, 2010 6:47 pm
Forum: Builds
Topic: PROJECT V6 SIGMA (NOW PROJECT V8 SIGMA)
Replies: 128
Views: 34116

Re: PROJECT V6 SIGMA (UPDATE>>)

When you put a diff in, you might be able to squeeze a early commodore diff in without shortening it(im sure they are the narrower ones, vl maybe)... the sigma rear ends are wider than you think, just depends on what tyres an rims you want to fit. yea man your right the vl's and before have the sho...
by HEMI26
Sun Dec 19, 2010 3:25 pm
Forum: Events » Event Photo Album » Cruise Register
Topic: EOI, VIC Cruise, Ideas
Replies: 108
Views: 84096

Re: EOI, VIC Cruise, Ideas

I'll be one more after march when i get my plastic back :P

Ride:turbo gj scorp or tuff n/a if i havent got all the turbo part's by then :thumpsup:
Suburb:Ivanhoe
Location:dosn't bother me!
by HEMI26
Sat Dec 18, 2010 9:46 pm
Forum: Builds
Topic: HEMI26's dB Drag Scorpo
Replies: 34
Views: 7144

Re: My Old n New Scorpo

Pic's of the R31 Cepters on the scorpo
ImageImageImage
Just need to put some 205/60/15's on the front as the 225's are a little big :(
by HEMI26
Sat Dec 18, 2010 3:52 pm
Forum: Engine
Topic: What Webber is this?
Replies: 22
Views: 3325

Re: What Webber is this?

does anybody know what the dfv carb came out on? Not 100% sure, but I think the 2L Ford Capri (Pinto engined)? (The 2L Escorts had a 32/36 DGV IIRC, not sure whether the 2L Cortina had a DGV or DFV) Another workable option on a stock Saturn could be the 32DIR ..... very similar carb to the DFV (sam...
by HEMI26
Sat Dec 18, 2010 3:48 pm
Forum: Engine
Topic: difference 2.6L & 2L..astron 1 & 2.having troubles!
Replies: 19
Views: 1778

Re: difference 2.6L & 2L..astron 1 & 2.having troubles!

all good man, n good luck there :thumpsup:
by HEMI26
Fri Dec 17, 2010 9:17 pm
Forum: Engine
Topic: What Webber is this?
Replies: 22
Views: 3325

Re: What Webber is this?

Cheers man :thumpsup:
by HEMI26
Fri Dec 17, 2010 8:44 pm
Forum: Engine
Topic: What Webber is this?
Replies: 22
Views: 3325

Re: What Webber is this?

does anybody know what the dfv carb came out on?
by HEMI26
Fri Dec 17, 2010 6:13 pm
Forum: Engine
Topic: difference 2.6L & 2L..astron 1 & 2.having troubles!
Replies: 19
Views: 1778

Re: difference 2.6L & 2L..astron 1 & 2.having troubles!

good luck there dude with the wiring, are u running it n/a efi?
if not my scorpo is still to gether if ya want a peak at it or i can put picks up for the carby set up if ya need it :thumpsup:
by HEMI26
Thu Dec 16, 2010 8:51 pm
Forum: Builds
Topic: tubbys GN panel van project
Replies: 224
Views: 94794

Re: tubbys GN panel van project

lookin good n different!! be good to see the finished job (H)
by HEMI26
Thu Dec 16, 2010 7:53 pm
Forum: Engine
Topic: What Webber is this?
Replies: 22
Views: 3325

Re: What Webber is this?

cheers for the great help ppl Moral to the story: Build everything in your engine to match, get it dyno tuned and it should work well together. Hit and miss means low $$$ but low performance also. sounds right man, my carb was tweaked n tuned by Mcdonald bro's in thomastown to suit the build of my e...
by HEMI26
Thu Dec 16, 2010 4:50 pm
Forum: Engine
Topic: difference 2.6L & 2L..astron 1 & 2.having troubles!
Replies: 19
Views: 1778

Re: difference 2.6L & 2L..astron 1 & 2.having troubles!

the harmonic balancer pulley dude so u have the grove for the ps pump :thumpsup:
by HEMI26
Thu Dec 16, 2010 7:55 am
Forum: Engine
Topic: What Webber is this?
Replies: 22
Views: 3325

Re: What Webber is this?

I had a good look in the day light ppl and could'nt see any holley logo's

but i did see 32/36 DFV stamped on the rocker cover side of the base Image
by HEMI26
Thu Dec 16, 2010 7:30 am
Forum: Engine
Topic: difference 2.6L & 2L..astron 1 & 2.having troubles!
Replies: 19
Views: 1778

Re: difference 2.6L & 2L..astron 1 & 2.having troubles!

the clutch cable should be the same dude and i would say ur block being a 2.6 man it will be a wide block

did u get the pully sorted for the ps? and i would say the alternater will bolt staight up :thumpsup:
by HEMI26
Wed Dec 15, 2010 9:19 pm
Forum: Engine
Topic: difference 2.6L & 2L..astron 1 & 2.having troubles!
Replies: 19
Views: 1778

Re: difference 2.6L & 2L..astron 1 & 2.having troubles!

thanx for that az from that i can say it would be a wide bloke to
by HEMI26
Wed Dec 15, 2010 9:01 pm
Forum: Engine
Topic: difference 2.6L & 2L..astron 1 & 2.having troubles!
Replies: 19
Views: 1778

Re: difference 2.6L & 2L..astron 1 & 2.having troubles!

hey harry your eng is a a2, the 1 u got off az was an a1 thats y every thing is diff with it but it will still go in.

hey az was it a man or auto?
by HEMI26
Wed Dec 15, 2010 8:54 pm
Forum: Engine
Topic: What Webber is this?
Replies: 22
Views: 3325

Re: What Webber is this?

this is the only stamp i can see atmImage

hey man is the stamp on the side of the base or the top of it looking from above?
by HEMI26
Wed Dec 15, 2010 8:41 pm
Forum: Engine
Topic: What Webber is this?
Replies: 22
Views: 3325

Re: What Webber is this?

deff says weber on it on the pump bit, but it is a part that can be bolted on i need a closer look to see if it says weber on the base/actual carb cast
by HEMI26
Wed Dec 15, 2010 7:24 pm
Forum: Engine
Topic: What Webber is this?
Replies: 22
Views: 3325

What Webber is this?

Hi ppl im just woundering what type of weber carb this is if anyone can tell it will be a great help as im not sure what type it is and all the carby blokes i know are v8 lovers, its on a worked 4g54 and was tweaked by the old owner and made good power. cheers dave here's a pic of the carb http://im...
by HEMI26
Sat Dec 11, 2010 6:34 pm
Forum: Starion's Shed
Topic: Jackie Chan Starion
Replies: 21
Views: 9937

Re: Jackie Chan Starion

That looks mean as!! didnt even no they existed (H)
by HEMI26
Wed Dec 08, 2010 8:06 pm
Forum: Members Rides
Topic: TVM006's GK GSR
Replies: 86
Views: 30835

Re: TVM006's GK GSR

man keep the sigi it will be better than most of there cars and you wont be the same as em :thumpsup:

but at the same time a 2nd cheap running car you don't have to care about (paint job etc) isnt a bad idea (H)
by HEMI26
Mon Dec 06, 2010 6:20 pm
Forum: Members Rides
Topic: MY OLD SCORPION
Replies: 5
Views: 813

Re: MY OLD SCORPION

man that scorpo is makin me want to paint my red 1 white!!! (H)
by HEMI26
Sat Dec 04, 2010 11:31 pm
Forum: Members Rides
Topic: MY OLD SCORPION
Replies: 5
Views: 813

Re: MY OLD SCORPION

hey man nice ride there (H) i had a nice brown gk a few yrs ago theres a few pics before it left the body was a little bad in some bits :( and currently building a red gj turbo atm
by HEMI26
Fri Dec 03, 2010 9:07 pm
Forum: Transmission/Drivetrain
Topic: manual gearbox into auto motor?? NEED HELP ASAP!!!
Replies: 6
Views: 723

Re: manual gearbox into auto motor?? NEED HELP ASAP!!!

its a narrow block man being a auto and wont bolt up to the 2.6 man been there and tryd it :@
by HEMI26
Thu Dec 02, 2010 8:11 pm
Forum: Members Rides
Topic: TVM006's GK GSR
Replies: 86
Views: 30835

Re: TVM006's GK GSR

Nice man :thumpsup:
by HEMI26
Thu Dec 02, 2010 3:34 pm
Forum: Builds
Topic: HEMI26's dB Drag Scorpo
Replies: 34
Views: 7144

HEMI26's dB Drag Scorpo

Hi ppl i throught to thro my gj Scorpo build up here its a n/a build with most of my old gk scorpo parts (the body was stuffed on it) that was built at McDonald bros in Thomastown (Melbourne) by previous owner in 2001 and made 146.8rwhp on there dyno, with it hardly driven and a blown clutch setting...
by HEMI26
Thu Dec 02, 2010 12:28 pm
Forum: Builds
Topic: 84GKSIG Build EFI plus more
Replies: 94
Views: 67870

Re: 84GKSIG slow build - EFI

i thought so man, and didnt think that jap 5spds were hard to get and would be good to see a efi 2l
by HEMI26
Wed Dec 01, 2010 9:03 pm
Forum: Builds
Topic: ISKA8's MITSUBISHI SIGMA GK GSR TURBO BUILD...ENGINE SOLD!!
Replies: 506
Views: 360667

Re: ISKA.8's turbo build.....THINKING OF PARTING WITH MY BABY..

will be wickerd to see ive only seen the 13b transplant so fair

all good man ill see ya then :thumpsup: