Sigma-galant.com

The LB rear bumper fits straight on (except for the side mounts - where you will need to make your own fixing arrangements) The front is another matter :think: The main mounting holes on the bar need to be slotted to move the bar upwards (about 10 - 15mm at most) Then the mounting panel under the gr...

Nup !

Couldn't get a similar unit to bolt into same position

Would love power steering - I guess I'll have to "bulk up"

Hi James, I used Knox carpets (for the carpets) They were brilliant - made my set in 15 mins while I waited !! :| I had a guy do my door trims etc ... from Straightline Motor trimmers 8720 0999 (ask for Steve and mention that Lindsay recommended you) He did a brilliant job for a fair price ! I could...

My choices are 0 and +20 offset !
Probably 16 x 9" rear and 16 x 8" fronts

I will have some test tyres fitted up to the car and play with the offsets before I order them some time in the new year

thanks for your help Dave

Thanks Dave, Offset is offset - no matter what the width :) Just remembered I'm using a Scorpion disc brake rear end which is close to 12mm wider each side ... So I think zero offset is going to be very close for the rears (14 - 12 = 2) :thumpsup: Fronts I will start with the +20 offset wheel option...

Hi Dave,

So judging by the pics and this info, the aprox optimum offset would be moved 10mm to the outside.

This would mean a +14 offset wheel.

Does that sould correct ?

Lindsay

Thanks very much Dave,

Just as I thought - the inner guard will be the limiting factor !
Do you know the offset of the wheels ?

Lindsay

Hi Dave,

So would 255 or 265s be a chance to fit ?
My guard lips are rolled (only about 5mm) .... but with a perfect offset ?

I'll probably try 235+ on the front of mine and it has a little neg camber too !

Lindsay

Hi Dave,

Is that original paint or resprayed (acrylic or 2 pack) ?

Lindsay

Thanks Jason,

That makes me feel better

I beleive that they were "fully imported" .... but wouldn't stake my life on it !

Thanks Dave, Yes, I would normally agree with you with my experience with "Holden's" .... but doesn't seem the case with mine at least ! I guess my query about the 4 and 9 is becoming irrelivant now - as it is not the number I will give to VicRoads or my Insurance company :think: Lindsay

Thanks Dave,

Ok, The build plate and the "strut" number match ...... but I "beg to differ" that the body/chassis serial numbers match the build plate ! (nothing even close to similar)

neither mine or Mark's match

Can you check yours for me ?

Lindsay

Thanks Mark, Can anyone advise the difference between the following ? : 1. Number stamped on strut tower ... eg. LC72536KL3741234 (not my actual number) - this appears on the aluminium build plate ! 2. Number stamped into firewall ...... eg. A73-3121234 (not my actual number) The A73 is the one I'm ...

Nothing !! ??

Hi, I've got a bit of a problem with reading the "font" on my chasis number plate. I need this for insurance ... and of course VicRoads won't give me that information (hasn't been registered for a long time) It typically reads A73-1721840 ..... but the problem I'm having is reading the &qu...

Yep it's a NA - was meant for my sons 1st car when he turned 18 (P platers can't have turbos) He's 21 now and not getting it ! It will be my daily or weekend driver / cruiser so not interested in outright performance ! Brakes - no room for booster so will just see how that goes "boosterless&quo...

Hi all, Here's a few pics I took last night of where things are up to atm :wut: Lindsay http://i276.photobucket.com/albums/kk6/lancer_sr20/engine%20bay/1.jpg http://i276.photobucket.com/albums/kk6/lancer_sr20/exterior/3.jpg http://i276.photobucket.com/albums/kk6/lancer_sr20/exterior/6.jpg http://i27...

Hi all,

What is the correct procedure to adjust the Rear Brake Caliper Pistons on a GE Scorpion ?

........... or

can anyone "quote" what the service manual says in regards to this ?

Lindsay

Hi guys, I thought the wiring part would be pretty quick and easy !! How wrong was I 8o| As much as it is straight forward hooking up wires, running them to the correct spots from all corners of the car and joining back up to original connectors etc is probably the hardest thing I could have done. A...

Making good progress Mark

I like the sound of an LSD centre

Very nice clean original car Dave.

Enjoy cruising

Thanks all + tubby,

I don't want to change the original look of the guages (I had a new electronic speedo customised to replicate the original look too).

I'll see if I can find an old pajero and research that thought !

P.S. A/F guage sounds like a cool thought btw - but not for me !

Lindsay

I had speedhut customise there Electronic Speedo with the layout of my Lancer (to look factory)

They did a great job and it cost around $250

Yet to fit it to see how it works - doing that atm !

Lindsay

Hi all, I hope this will be the last of my random / strange questions for some time :z Does anyone know if a factory Mitsubishi/Chrysler "Voltage Guage" is available for my LC Hatch dash ? I have heard tooooo many bad stories about the Amp Guage (so will not be hooking that up) .... but wo...

You will mostly only notice a spool/welded diff on the street when doing u-turns or parking, the rest of the time not a big deal !

Thanks Lance & Cottees

Hi all, Does anyone know if Sigma Power Steering (recirculating ball type) .. not rack & pinion... will fit Lancer LB/LC hatch's ? And the second part to the question is - if it will fit, does anyone have one that they are willing to sell ? Only looking for the steering box - not any of the pump...

Hi all, Does anyone know if Sigma Power Steering (recirculating ball type) .. not rack & pinion... will fit Lancer LB/LC hatch's ? And the second part to the question is - if it will fit, does anyone have one that they are willing to sell ? Only looking for the steering box - not any of the pump...

Thanks BAD-SIG,

Could have done with that info 6 weeks ago