Sigma-galant.com

Hi BAD-SIG, and hence why I want to change to the other GE one I have that seems to have the a/c on/off potentiometer style switch together with the fan switch, sort of like old radio volume control with left/right speaker control fader under it. Yes, that's the one I'm trying to get working properl...

Welcome Lancer Racing Team,

Love the "old skool" Torana Hatch in the driveway too !!!
I had a 76 SS 5.0 ltr Hatch when I was younger (refer photobucket pics)

Lindsay

Hi Phildeb, Yep, seen some posts over the time from you :) Just a small speil as per below plus a link to any pic site like photobucket etc so we know a bit more about your car/s ..... eg. Site name: phildeb Location: ????, Qld Car details: 1977 LB Lancer bla bla Link to photos: Photobucket ? Lindsay

Thanks jigganought, But I eally need a bit more info than that. I have I think 3 wires coming from the "dail Sigma switch" that sits behind the "fan" switch. I have that thermostat thingy with 2 teminals of it and a relay with 4 wires looping back and forth between everything. Li...

Blue thunder,

Have a look at my photobucket stuff with the link below.

It has pics of my swirl pot for my fuel injection - that I built into my original tank.

Any questions - just ask ..... but it's in the car so I can't take it out to lok at etc...

Lindsay

Hi all, Sorry to go wimpy and "non performance" on you all here ... but I have a little issue :$ I sourced a factory Air Conditioning unit from a Sigma ... not sure what model but I think "early" (Air International brand quite some time ago) and are having difficulty working it o...

There may be a couple of other considerations to think about when talking about tyre fitment: Scrub radius (front) - this is basically an imaginary line from the top of your strut through your lower outer ball joint (when veiwed from the front of your car) and to the ground. Now find the centre of y...

I can tell you where you biggest problem will be ! The pissy narrow gearbox tunnel ! My project back in 1991 was to do a 340 into my LC Lancer for the show circuit ..... only problem was marriage, a new house and money got in the way. The 340 small block was about "as good as it gets" with...

Hi all, I have those Sigma LCA in my LC Lancer :D I had bloody Nolathane bushes going in but found that they really just didn't want to go where I wanted them (ie. for more caster). So my mission atm is to fit VE Commodore Rear upper arm "spherical bearings" (they are rubber enclosed) Alot...

nuh, wouldn't mount of either end bumper holes unless you want it to fall down ! Mounting at the front picks up off crossmember and then the bolt holes below radiator that mount the caster link bracket. rear picked up off bumper mounts - but I would not recommend using them neccessarily (as the pane...

Build is coming along slower than I would like being only able to spend a certain amount of time on it. Drivetrain is in and I'm working on all of the wiring for both "old car loom" and the "new loom" for the fuel injection. Hoping to have the engine "started" maybe in ...

I borrowed the rotissorie from work. I can get close up pics if you want ??

Btw - the balance point for the pivots were "perfect" and I could spin the car 360 deg with one finger ..... so that was nice too !

Thanks Turbo047

I'll beware of this if I pay them a visit

Cool

Thanks Dave

Thanks Sporpma82,

I'll drop in and have a look at their work sometime

Have you had stuff done by them ?

Lindsay

Did you have any luck with this Digihed ?

Hi all,

Can anyone recommend a quality auto trimmer in Melb South East (at a reasonable price) ?

I need to re-trim all my inside panels/door trims to a "new design" with some embroiding as well.
Will probably leave the seats for now (only running fronts anyway).

Lindsay

Hi Dave,

What sort of carpet was it ?

Loop or "Shagpile" and how much was it ?

Lindsay

I have just bought an electronic speedo from the States.

They even copied the artwork from my original LC Lancer speedo so that it should look bloody close to "factory"

Haven't fitted it as yet but very have with the service, look and price !

http://www.speedhut.com

I'll have complete LC frt and rear bars available some time in the future if anyone wants them.

I'm changing over to LB bars - but need to make sure that it all works first before saying goodbye to the old ones !

Does anyone know if he can supply any rubbers for LC Hatches ?

Thanks Jason, I like the way you think !!! Those Ebay wheels are "exactly" what I'm thinking of .... and a zero offset :) I just have to work out if they fit now ! Being a "new" wheel, I should be able to get them over the next 6 months when I can finally work out what fits under...

Thanks Jason, Yes, that is along the style I'm looking for ..... and even simpler with less spokes (easier to clean :) ) Thanks for the link, I will keep them on my favourites. I notice that there seem to be quite a few 5 - 10 offset wheels there ..... which seem to be very hard to find here with ne...

Yep The interior will continue with black/blue/silver theme :) I've had that before with my Torana - so I know it will be really cool (H) Trying to spend one night and one day per weekend working on it to get it done. It's getting there and once I get the engine back in, I'll feel alot closer to the...

From someone that has an SR20 in a LC Lancer ..... don't do it !
You will have trouble clearing the steering, the gear box is much bigger and will need tunnel mods and the brake booster won't fit ...... other than that BLOODY GREAT

Hi all, More progress finally - Had the car painted last week and it is now safely in its new home for me to continue the next phase of building "the dream". Fortunately, my new partner is excited about the project and helping/supporting the "finishing off" of her :) Here's a pic...

Thanks 75wagon ... Dave isn't it ?

Anyway, this thread is about the car ... not me !

Lindsay

Thanks Scorpma82,

At least the car will be staying with me forever

Lindsay

Hi all, Just thought I'd let anyone interested know how the extremely long term build of my LC Lancer is progressing ! It is about 4 weeks away from top coat paint at the panel shop .... and about 6 months to assemble etc....... So xmas 2012 is a possibility. On a personal note - I have separated fr...