Sigma-galant.com

Here's my gal, shes just knocked over 100 000ks so i gave her a new spary job for her birthday http://i824.photobucket.com/albums/zz168/paully77galant/flaked.jpg Thats full metal flake! The silver is actaully the chunkiest flake you can get! I'm about to put on another set of stock wheels that i've ...

yep matte clear still shows off pearls and meatllic, ya just have to use a bit more pearl thats all. the pic you done of the silver that goes all the way to the bottom looks good.As for doin metal flake it is a big job and requires a lot of product as it doesnt look any good unless you acheive full ...

i've just had a set of stockies widened from a 4" rim to 6" with standard back spacing. They use a 205/60/13 tire and look awesome.However the widening cost $125 each wheel. And the tires are 'nankang' at $90 each. Find tires that are wider or lower profile for a 13" wheel will be ext...

because the pink paint you already have is so bright the other colour should be a neutral colour (white, grey, silver, black, etc). peronally i'd go white maybe with a pink or white pearl. - i've been doing custom paint for 9 years now and have two toned plenty of cars * Also think about the option ...

so r u guys telling me that i might have wagon axles/diff in my sedan?

Yeah my local parts place is full of morons - i guess thats why they're stuck working in there in the first place

Theres a yellow GC at centre rd wreckers, but its been raped pretty hard. Its been difficult for me getting parts in melbourne, especially panels. Most of my spares i bought from guys interstate - i reckon there'd be twice as many galants in tassie than here. Stuff like bumpers and stainless trims c...

I have a 77 GD sedan and i'm having trouble finding out what rear wheel bearings to get to replace the buggered ones i've got. I know that there are at least two different types, between the borg warner and the mitsubishi diffs, but i dont know which one i've got. The bearings in my car are quite la...

use a small hole saw to cut a hole into the side of the rail, drop in a flared nut, bolt up ya box, then weld the peice of steel that you cut out with the hole saw back in.

I'll bring my galant to a cruise around melbourne, but my car is only a 4 speed and i hate taking it onto the freeway - its no good over 90 kliks
I'm located near chady

For rust prevention inside doors and on the floor pan etc, there is a product made by 'POR 15' that is similar to fish oil, but has no smell and is a better safe guard against rust spreading. If you have just done a rust repair then brush it over any areas that you wont see(eg, in doors, over the fl...

I am a spray painter - panel beater and have restored heaps of japanese cars from the seventies( galants, geminis, datsuns, etc...). Every car thats over 30 years old is highly likely to have rust growing in it somewhere. The best method of removal is to completely cut it out and weld is a new secti...

PM sent - 'shuggy'

Shuggy,
if the mount a2612 has 60mm spacing between the bolt holes then i'm also after one of those mounts. Can you help me out?

i bought my GD galant from center rd wreckers for $600 bucks, because it had no dents or rust and was totally original, down to the leads plugs and tyres and had only 52,000 kays on the clock... couldn't go past it...
I'm actually a gemini nut!
but now i love my galant (gloria)

its gonna cost $130 a pair, so $260 for the widening, then i'll have them sandblasted and powdercoated, so the wheels will cost about $350 all up (less tyres). i only want to add some 'dish' onto the wheels, not requiring more grip, just looks good. I'm gonna be reparaying my car around easter time,...

yeah i did get the grille from ya. i've got the 5 box now but i've got to find the LC crossmember to fit it do you know if its possible to modify the 4 speed mount to fit it? and will the shifter from the 4 speed fit?

Thanks for all the help guys! I've decided to bite the bullet and get 50mm added to the FS taking the wheels to 6.5" which is 85mm FS and 110mm BS.What do ya reckon? And now the hard part... finding tyres to fit...

how wide is a stock wheel? i meassured the distance fron the rim to the guard lip and a reckon i could add at least 1.5 inches without scrubbing. the hard part is gonna be findind tires that fit though. i'll need like 215/55R13 or215/60R13 and i havent been able to find any on line

i've been looking for an old school style set of wheels for my GD and cant find anything that looks good and fits, so i've deciced that i'm goin to modify the original steel wheels to make them wider by adding some size onto the dish (outer) side of the wheel. There's a place in moorabin called ajax...

thanks for that info is gonna help greatly, however... is the rear crossmember mount different from the 4to the 5 speed? and will the clutch cable from the 4 work on the 5?

i'm thinking about doin the same eng conversion in my '77 gd sedan and i've heard that some sigmas have c10 autos behind them. its only a rumor to me but worth investigating as that would be a strong option. also are you gonna get yours engineered?

Nice one! she looks just like mine when i got it, minus the vinyl roof. Should just straighten it out a bit and paint it the same colour again, stock ones look awesome once they're cleaned up

damn them! they crushed all their old galants, the week before i stacked mine! and i've spent days looking for wreckers in vic with one..... no luck yet =(