Sigma-galant.com

<3

I made a curtain to keep fragments of decayed sigma from entering my electronics. http://i61.tinypic.com/2wm43tv.jpg I began cutting, blasting, rust converting grinding and swearing. I have absolutely no idea what I am doing and would love some experienced suggestion of procedure here. I know I shou...

Facebook has a edit and related history function. The biggest shitheads on the internet also frequent there and no one has died from either function.

Whoops on the double pic post

PS WHERE THE HELL IS THE EDIT BUTTON? What is this? 1995?

Getting ready for the onslaught. http://i59.tinypic.com/65vnfk.jpg More shitness http://i59.tinypic.com/oaasn5.jpg http://i58.tinypic.com/2vdhcoz.jpg http://i62.tinypic.com/e0hs9.jpg sometimes you rally have to ask yourself if it is even worth it. On a positive note I checked the heater core against...

I'm yet to do a full inspection but if the gk one will fit that seems like a good option . eBay seller said no but I doubt they know any more that it says on the box.

I need to do something about my leaking heater core. I have called locally and have been told repair is about $200 or new for $240. On ebay I found some GJ/GK units for $145 but am unsure of compatibility with GN. My final option is to repair myself but I am unsure if this is a good idea given how m...

Windscreen was leaking pretty bad so I pulled it out. I just used a cheap box cutter and it was easy. http://i60.tinypic.com/124dmr6.jpg :( :( :( :( :( :( :( :( http://i58.tinypic.com/2qx23ya.jpg http://i60.tinypic.com/161yqvt.jpg http://i62.tinypic.com/2emoolk.jpg http://i59.tinypic.com/2vl0ebr.jpg...

I just installed an EBC and am about to go test it. I will tell you where mine blows lol

While I agree it doesn't seem to happen often, I'd at least put an air bleed on the front water port, BECAUSE.. Look at the height difference between the rear and front water port, This can trap air, leaving the front of the head without water flow. Even if it's just a small 2mm bleed into the hose...

I put the whole magna head on. I didn't think there was a need to modify anything doing this with an Astron 2 block?

Started modelling the radio panel. I still dont have the audio module to completely figure it out. I copied most of it from the stock panel. http://i58.tinypic.com/x7kts.jpg I soldered the top back on the radiator. http://i57.tinypic.com/2hg626s.jpg http://i57.tinypic.com/jgpl44.jpg I also replaced ...

It's blowing head gaskets for a reason. First things first, WHERE is the head gasket blowing out, and is it in the same spot each time? The usual things that will cause a gasket to blow. 1. Block or head aren't flat. 2. Corrosion in the head or block, around the water holes. 3. Re-using old head bo...

Galant Eterna? Give!

Haven't done much with the Sigma, here are some random bits though Got a 10Hz GPS, naturally 3D printed a mount for it. It was a little bit out but I just heated it with a heat gun and that allowed it to deform nicely. http://i60.tinypic.com/o0un2q.jpg Played around with CAN BUS in hopes of adding s...

I am extremely jealous of the louvres!

I used the pulley wheel off the sigma alternator and made up a spacer to fit it on the triton alternator. Tensioning bracket was further away so I got a bit dodgy. Nothing about the install is ideal, but it works fine - I was just using an alternator I had on hand. The bottom bolt doesn't even locat...

Over 1000 views! Hopefully it's keeping some people entertained! I have done some work on the audio. New speakers, also head unit that i never ended up using http://i57.tinypic.com/ab35mx.jpg Comparison of drivers side speaker. Direct fit apart from pushing hard on vent pipe. http://i58.tinypic.com/...

I had a lot of trouble with the standard sigma 40A alternator in my build. I am running electric power steering however.

I installed a 90A alternator from a 2.4L triton and it solved all my problems.

As the last mount like to warp in the sun I designed one that I hope will be more rigid. http://i57.tinypic.com/257kcjt.jpg http://i60.tinypic.com/99fhut.jpg http://i60.tinypic.com/2zod8w9.jpg I had a GM 3 bar map sensor laying around from a broken electronic boost controller I was given. I though i...

I had this problem and installing a bigger alternator solved it for some stupid reason.

Great work!

Keen to see how you go with the R31 diff as I am looking at going down that path soon.

Finally got to clean the workshop so I could do some work that did not involve getting filthy or catching fire. It did not stay like this for long http://i57.tinypic.com/wrntw7.jpg I need to pull the windscreen out and do some rust repair as it leaks quite a bit. For this reason I felt it prudent to...

I really wish I had a pair. Unfortunately only have one.

Should have had the sigma in the drifts! At the drifts was pretty close though! http://i60.tinypic.com/dc3p54.jpg http://i58.tinypic.com/muiil0.jpg Quick fix for the replacement seat. It's just an iron on patch http://i59.tinypic.com/33bjr6s.jpg http://i61.tinypic.com/wweru8.jpg Seat is so much bett...

(Still catching up) I was rough with the sump as it already had massive damage at the front from the previous owner and there was no point polishing a turd. After multiple rounds with the BFH2000 the bolt holes no longer lined up with the block :( Being a wierd sump I could not source another one so...

(Update from the past) The sump was not only leaking but hitting badly in the rack still. One spot is particularly bad near the existing dent to the right and would have worn a hole untreated. http://i58.tinypic.com/2kfrpe.jpg As the sump was already in bad condition I wasn't too elegant with the ha...

Top work, Matt -she's lookin good :thumpsup: That's a lot of work done in a short space of time -major props. How different does it ride and handle now with that rack conversion -are you happy with the result so far? Any downsides? Thanks DDT. I have devoted a lot of time to this build. Pretty much...

Thanks for all the suggestions! I'd love to figure out which year US G54Bs have compatible flywheels. I think the problem I have been having is oil leaking into the clutch from the sump. Hopefully I can get that fixed and the clutch will recover/dry out. It's easier for me to get an RX7 box than a T...

profile pic looks sick, hope the rear wheels will pair with front also great work on wiring, glad too see you connected all the earth wires into one spot, reminds me on my problem about earth loops keep going, well done ! Thanks Tomica! Australian Deilivered Sigmas use live rear axles - so rear cam...