Search found 610 matches
- Thu Mar 26, 2009 8:07 pm
- Forum: Sigma's Section
- Topic: 3.5L stroker kit? I want one
- Replies: 44
- Views: 7932
Re: 3.5L stroker kit? I want one
ive strked mine to 2.95 approx and if i was na around 3.05. rpw does them, he offset ground my crank and welded it up to do that, with a larger cp forged piston, not sure on size as everythings at the engine builder, they might be 94 or 95 mm with a 94 mm piston and 106 mm stroke gives you 2942 and...
- Thu Mar 26, 2009 6:07 pm
- Forum: Engine
- Topic: 2.6 Cam profile
- Replies: 11
- Views: 2020
Re: 2.6 Cam profile
The course is called Motorsport, Cert III, IV and Diploma Its just all the basics of mechanics as well as welding, fabrication, operating in motorsport environments etc. I started like 6-7 weeks ago so I'm doing Cert III and Dean is (currently) teaching us fasteners (thread tapping, identifying, bo...
- Thu Mar 26, 2009 5:38 pm
- Forum: Engine
- Topic: 2.6 Cam profile
- Replies: 11
- Views: 2020
Re: 2.6 Cam profile
Also cheater: The webers are twin 40DCOE's as seen in my signature.. never ran a choke although i probably should. chokes are the removable venturis in a dcoe with your 40 mm the biggest you can use is 37 mm and are quite small for a 2.6 its something that you would use on a 1.6 to a 2 Lt And with ...
- Thu Mar 26, 2009 5:23 pm
- Forum: Sigma's Section
- Topic: 3.5L stroker kit? I want one
- Replies: 44
- Views: 7932
Re: 3.5L stroker kit? I want one
you just need 17.5 mm thick bearings - good luckamgis_obrut wrote:hey im gonna build one of these 3.5l strokers
anyone know of any 6.5" long rods with a 18mm diameter bigend or do i just turn the std rods upside down
- Thu Mar 26, 2009 3:43 pm
- Forum: Engine
- Topic: 2.6 Cam profile
- Replies: 11
- Views: 2020
Re: 2.6 Cam profile
ok mine pulls 7200 at the end of sandown front strait in 4th ( 201 ks by my gear calc )TUFSIG wrote:man i must have a freak 2.6 in my new gsr it revs past 6 lol
do I win the pissing comp
- Thu Mar 26, 2009 3:33 pm
- Forum: Engine
- Topic: 2.6 Cam profile
- Replies: 11
- Views: 2020
Re: 2.6 Cam profile
Or even specs of an aftermarket one with the result of that profile. I'm having one custom made cheaply by my tafe teacher, Dean Tighe from Tighe Cams.. and he just needs some background information to start off with.. I'm only wanting to produce power up to 6,000rpm.. the old magna engine never go...
- Thu Mar 26, 2009 3:18 pm
- Forum: Sigma's Section
- Topic: 3.5L stroker kit? I want one
- Replies: 44
- Views: 7932
Re: 3.5L stroker kit? I want one
mate, that number just rings out every time. Had bout 15/20 tries, but no one ever picks up :roll: well I got though it seems that I was the third guy to do so they dont Know anything about a stroker crank for 4g54s I remember old colt from the US talking about offset grinding the pins to 48 mm and...
- Tue Mar 24, 2009 5:43 pm
- Forum: Sigma's Section
- Topic: 3.5L stroker kit? I want one
- Replies: 44
- Views: 7932
Re: 3.5L stroker kit? I want one
i reckon he is full o'shit. now thats harsh !! I would have to agree though 288 deg cam... will be lumping over very nicely... rolls off at 4500? Not likely, more like just gettin into it at 4500 3.5ltr stroker kit & 200rwkw NO WAY to make a 3.5 with as he says 0.020" up pistons would need...
- Sun Mar 22, 2009 8:50 pm
- Forum: Transmission/Drivetrain
- Topic: how not to CIG diff lock
- Replies: 9
- Views: 2051
- Fri Mar 20, 2009 7:53 pm
- Forum: Engine
- Topic: first to post here
- Replies: 1
- Views: 829
first to post here
well guys before site went down ( the scares of my wrists are fading ) I about to do a blow by blow on my rebuild any whey I fitted the pistons to the rods and now have all of my bottom end bit s board - balanced - machined eta anywhy I will ass the bottom end shortly with pics and post as I go che...