Sigma-galant.com

Sweet! I found a g54b in a l200 at the local wreckers. Since my g52 flywheel will be incompatible to swap over, are all the wideblock flywheels the same? This particular truck was 4wd with the KM145 on it.

When doing a wideblock and KM132 swap, will the later slip yoke (bigger trans output shaft) fit onto the stock U-joint or will I need a new propeller shaft?

I know the trans mount shift back a bit as well.

I think it's a common grill on cars imported to the Philippines or is the Jap spec grill.

My hilux rear is drum so the disc conversion hasn't quite happened yet lol. Not sure which ones might be rear disc though, maybe the later years?

Left side still needs a coil cut on this side to match the right side and sit right where it should with a lightened front end (dummy block and head with trans bolted in only). http://imageshack.us/a/img24/9449/img7835nf.jpg http://imageshack.us/a/img827/1017/mg7840.jpg http://imageshack.us/a/img19/...

GT Grills aren't quad headlights though unless it's for a 71-73(GB). US tails are hideous, I vote for GC or GD front with GC tails...

5 lug swap completed, just need to get some camber plates to correct the positive camber from the widebody struts. Thought I was going to have to swap ball joints, but nope! The stockers fit perfectly, however once the car is actually ready to be driven, I need to replace the balljoints, tie rods, i...

Got a L200 trans crossmember that I can Modify to suit both the supra trans and the car! Just a tad wider than the Coupe's, which makes it easily adaptable. Drill new holes for mounting and new holes in trans mount spot. Now unlike the stock crossmember or a Starion crossmember, the tranny bushing m...

Just kickin it with a couple mates, talking cars a couple days ago

Don't you dare talk that blasphemy Nate! You better not sell that orange car after all you went through to get it!!!!!

I'd say inside, so the turn indicators are on the corners (I know GC tails don't follow this concept as do some cars).

I still dont think big ZG style flares really work on a galant. The only exception being incorporatedx's wagon (but that has a kind of a ratty look working for it) but I think I'd still like to see some big Bosozuko bubble flares, it'd be ridiculous but it might just work. That said I think tye Rot...

Scorpma82 wrote:

A112H wrote:When the 6G34 was phased out it was replaced by a 4G54, same body, lol

Hmm if that's the case, a 4G63 would fit nicely in there

Hmmm, Debonair Evo 1.......got a ring to it don't you think???

What would you do with the extra lever on the column lol? It's a column shifted auto .

77GDWAGON wrote:Colt galant GTO wagon
Think it may be a gb with gto front. Seen it before. Looks cool.

I believe in the "random Galant pictures" thread we agreed it was a GD Galant with A57C GTO front end, because the fenders are longer than GA/GB.

https://s-hphotos-snc6.fbcdn.net/180462_1698383223894_1367298001_32018239_4156165_n.jpg ^the 77 changed some much in a short period lol http://sphotos-a.xx.fbcdn.net/hphotos-snc6/267513_10150304854865336_2773362_n.jpg http://sphotos-a.xx.fbcdn.net/hphotos-snc6/269613_10150312504045336_478728_n.jpg ...

fabricate, modify or buy a aftermarket manifold that is setup for a top mount, meaning the turbo sits on top of the manifold vs under it.

Probably just you as those are stock Coupe leafs underneath it. I won't be abusing it with those leafs under it for that exact reason, plus it squats in the rear with that added weight from the axle lol. Pretty sure the axle would wrap wickedly from the amount of torque I'll be putting out hahahahah...

In my research on more rearend stuff, I found this tidbit of info, that could be helpful when sizing up a toyota rear end to their stock one. Toyota Rear Axle Widths : 55" wide, '79-85 4wd trucks/4runners - 6 Lug 58" wide, '86-95 4wd trucks/4runners - 6 Lug 56" wide, '79-95 2wd Trucks...

Nope! They wouldn't know the difference, he simply stated the ambers couldn't be "always on", which I had driven the 77 for 2yrs like that and no problem with cops. As long as the rear end has functional turn indicators/hazards (amber or red), brake lights/parking (position lights) I'm fin...

Did some wiring today, had to rewire the tails so that the amber corners functioned like AU/JDM/EU spec cars. US spec = top corners being that they were red, were parking lights/turn and brake lights as well with the middle light. My 77 was different and only the middle section was the brake light. ...

Put the surfboard that came with the car lol, to good use today! I don't know how to surf lol. http://sphotos-b.xx.fbcdn.net/hphotos-ash3/562110_10151548485725336_235752118_n.jpg http://sphotos-b.xx.fbcdn.net/hphotos-ash3/72772_10151548487165336_195985056_n.jpg http://sphotos-b.xx.fbcdn.net/hphotos-...

1600 badges make it sleeper ;) with the Astron sitting in the bay.

Quick photos snapped a bit earlier. http://img407.imageshack.us/img407/8892/mg7440p.jpg http://imageshack.us/a/img12/7956/mg7448.jpg http://imageshack.us/a/img541/3378/mg7432.jpg Autopal H4 headlights installed. http://imageshack.us/a/img703/8919/mg7443.jpg A little adjustment is needed on the Left ...

The problem is the challenger/sapporos, arrows aren't exactly common in the states, good luck finding a Fire Arrow lol. The early trucks with G52s, G63Bs, and the few Astron 1 G54s narrowblocks were cable operated KM132s. My buddy Adam is always hunting the wreckers for spares for his 77 rally lance...

In time I will, still got a ways before I'm ready to upgrade the audio in either of my cars lol. I was just wondering since I have a hardtop console .

When it comes to the center console, how did some of you mount your stereos in there or does it just sort of rest inside?

Good point..

Hmmm...don't really like it, anybody have a spare gas pedal assembly laying around for a GC/GD?

The benefit of still having the '77 Shell? I can test fit things when i'm not at the shop where the Coupe is at. Put the Starion pedal on the stock mount bracket, now to see how well it bolts up. If it doesn't work out, I'm going to need to request one from over there!