Sigma-galant.com

from a good source i got to know that the 2 door Lancers have different carpets than a Lancer hatchback/Celeste

Anyone willing to ship them a LB/LC Lancer hatchback set? Then I will get carpets that will fit :p

i have the parts catalogs of the 1976 Lancers and Celestes and the part numbers for the carpets are already different...(off course)

Hi guys

Is there anyone around who knows if the carpets of a 2 door LA/LB/LC lancer are the same as the ones for a LB/LC hatchback?

I found this site which makes new carpets but the hatchback isn't mentioned just the 2 door and the 4 door Lancers:
http://www.all-car-carpets.com.au/

Greetz
Sven

FYI: it's the 1978 model, a 1600ST ;)

AFAIK this Celeste was on the Geneva Motor show in 2012... --> correction: 2013
nice one idd

Won't be me, it's summer here :p

time for a small update i think: The 4G63 SOHC twin carb has been swapped for a 4G63 DOHC N/A now, but it's still a work in progress. I'm now waiting for a thermostat housing, intake manifold and fuel tank to be modified. The first 2 will be custom made and the tank will be modified to fit an in-tan...

75glnt wrote:Haha! Blue beat me to it

wasn't that hard tho :p

Last one looks like a Galant GSR one...



(sorry to steal your pic 75glnt...)

I'll give you "pics or it didn't happen"!! :P http://photos-e.ak.fbcdn.net/hphotos-ak-ash4/s720x720/1005861_661038313912664_454599586_n.jpg Anyone know what the flange is to suit? http://photos-g.ak.fbcdn.net/hphotos-ak-ash3/s720x720/1012193_661038437245985_2007066385_n.jpg I can find som...

Clutch is more about if it fits over the input shaft on the gearbox than the flywheel (talking 6 bolt flys). There are only 2 sizes of pressure plate, 215mm and 225mm. As far as I can tell; 225mm is for wide block Astron 215mm is for everything else :P I have a 4G52 flywheel and clutch that was fit...

How to fit a Jap 5 speed to a 4g63?? (What clutch, plate and fly) is that good enough of a question? Or should I just post something? :) I think this is a great idea Dave! And should be stickied I can already say that I used the clutch from a 4g52. The clutches between a E39A Galant GTI (over there...

Thanks! Strange, as far as i can tell they are there from factory... I'll try to take a picture of them next week...

Greetz
Sven

Hi guys Does anyone have a picture of the bottom side of the Celeste (LB/LC Lancer hatchback) body, just above the differential? I have there 2 bolt holes but there is nothing mounted. And I have the rubber damper installed about 20 cm's forward of it... Should there be a 2nd damper on that location...

To save your own head (quite literally) take it to a professional who will crack the tank open for you.....you will have to pay, but you'll live long enough to see inside the tank! Well, the idea is to use my spare tank, which is empty and vented by laying in the shelf for years now. I have a fuel ...

Is there anyone around who has cut his/her fueltank open? I'm wondering how those baffle plates are installed in mine as i want to install an in-tank fuel pump if possible...

Ok so here's a pic of the shot blasted skid pan, shows the extent of repair needed [url=http://s1321.photobucket.com/user/partyboyjay/media/WP_000462_zps90cb202b.jpg.html][img] Hi Partyboyjay Just to avoid this with mine I got the protective paint/plastic like layer of with a paint stripper and i t...

this is from the same series of pictures and says 4g35:

i found this one: www.classicdash.com.au but the site seems to be down for the moment?

If i understand Lance when he says it fits his LB hatchback then i think it's indeed LB and LC hatchback iso LA - LB.

I would think that the LA/LB/LC Lancers have a shorter door (in lenght) than the Hatchbacks. Can anyone confirm this?

small update: they reacted on my email. They still have some so i ordered 2 sets and payed for them. Now the waiting begins...

ah! i was looking on his ebay store, there it's not listed. It's listed in the general car parts section: http://www.ebay.com.au/itm/MITSUBISHI-LANCER-LB-COUPE-2-DOOR-FRAME-RUBBERS-/130752266388#ht_2996wt_773 but it seems i'm too late: 6 available / 6 sold and he doesn't seem to ship worldwide? Anyw...

Ok been out in the garage and have fitted the new door rubbers to a Lb hatch. The rubbers are still list but are listed as La - Lb coupe door rubbers. When you open the add you will get more off an idea of what thay realy are for. Item No 130752266388 There is 8 left and thay DO FIT a Hatch Strange...

Thanks guys. I already had a look there myself but i didn't see any.

Does he still have some? I'm also looking for a set or 2...

A site with a lot of info about 4g63 is http://www.projectzerog.com
There you might find the answer, or on the site or on the forum...

great to hear that Cottees! Nice work!

Hey IncorpoRatedX! You can always try a Plymouth Arrow 5 speed gearbox, those should be cable operated KM132's with short tail housings. I think also the Plymouth Sapporo /Dodge Challenger / Dodge Colt have those gearboxes but they have the longer tail housings... Well, the European versions of thos...

I think it's a Saturn without balance shafts, so the extra 2 cilinders will make it run smooth and quiet and add a some power. Nothing spectacular i guess

As for the car: i like it

i believe they were in early to mid model lancers (aus) in a DOHC + EFI format They were the 1.8 DOHC engines (G62B) No rwd exhaust manifolds that I know of are available for it - it wll have to be a full custom thing. ive seen many CA/CB GSR lancers with the 1600 dohc efi engine Maybe those had th...