Sigma-galant.com

Might be hard to get a 4g52 flywheel..

So my plans ATM are to chuck a 4g54 into my lancer . I have a narrow 4g54 all ready to pop straight in. One thing I'm not sure about it because some posts I read say one things others say other things. If what I've read is correct. To bolt the narrow 4g54 nothing is required to fit it to a km119? I ...

Pb berg 4603 is impact orange found on valiant chargers, http://www.automotivetouchup.com/touch- ... odels/kill sunset orange at the top that's what the galant would be.

http://www.usedcarsgroup.com/1980-triumph-spitfire-novi-mi-i2893886636290643000-2.jpg ^^^ spitfire orange, hence the car. http://tenwheel.com/imgs/a/a/f/w/g/classic_1965_willys_military_jeep_cj5_4x4_sunset_orange_paint_rock_crawler_5_lgw.jpg ^^^ sunset orange. http://images.allamericanautomobiles.c...

the galant above is actually "sunset orange" paint code 064,092

the 073 is a bit more of a red orange. sunrise or sunset orange may be what you'd like.

Well, i thought it was listed as spitfire orange, apparently spitfire orange and 073 is actually different. is the orange that im going to repaint my lancer. but the sunrise orange from that chart is also really nice .

i recommend "spitfire orange" code A073

http://pages.ebay.com/link/?nav=item.vi ... 77&alt=web

Hope this helps thanks.

All research I've done the 6g73 dohc 2.5L out of a 95 diamante is a 251x32toothed belt? Which is what that eBay listing is for. It should fit. What's the differences?

Awesome dude! That's pretty neat on gas

Had a close up look at your gd on sunday jon, youve done a awesome job so far, cant wait to see it once you get the 4g63t into it. what are your plans with the 4g63t? are you gonna keep it stock or while its apart you gonna do some work? maybe a stroker kit and aftermarket ecu?

I bought a 3d printer that I'm learning on so I may be able to reproduce in the future. In the mean time I suggest going to a wreckers and looking at all cars see what's similar that will fit or to modify to make fit.

http://pages.ebay.com/link/?nav=item.vi ... 57&alt=web


Hope this helps?

I don't know much. But I do know know if you push more air out you'll benefit From letting more air in. If u catch my drift. So if your doing that sort of work to it. A set of twins isn't gonna hurt unless your budget doesn't let you.

My research shows a 32/36 weber will be good, each to their own I guess tho

Yes.

Have you asked them if they can just wack some sort of silencer towards the rear of the car?

Me and murphy are on a first name basis so I'm sure it is.

Its got an electric facet pump so I assume the pressure is alright. I'll get a pick of the diaphragm The vacuum advance diaphragm was a bit stiff. It doesn't move as much as I think it should freed it up a bit more I have 175psi in each cylinder. Just checked. Not sure what its ment to be. I hope it...

The owners manual I have with the car says it should be 13° btdc for twin carbs model. What should the compression be in each cylinder? Because I'll be checking all that this weekend.

OK so since I bought my lancer. I have had suspicions that its not running 100%. And for the life of my can't put my finger on why. From what I can tell everything is ok? It just doesn't seem to have much oomph as it should. Now I know they're not power houses. But this is what I'm experiencing. It ...

looking tidy!

Went to the Retro Eat Boutique Night Australia Day Cruise, at Capalaba/Cleveland in QLD near Brisbane today. What a turn out, so many people. overwhelmed by the amount of people i didnt take photos! spent to much time looking and admiring. Thanks to Superscan, i was able to attend, because i messed ...

Yeah I guess it's just a starting point the printer I got isn't the most flash one on the market. But I think it'll be alright for some things. I'm going to start with mould clips and for my lancer hatch I wanna try to print some latches that hold the back window shut. Most of the things I wanna pri...

Nice to seeing it come along so well.

220mm x 220mm x 230mm high

VGJONO wrote:

TYRE SHINE PLEASE.

gimme wheels. nuf said.


Looks awesome! good work man!

Hello People. Recently purchased a 3D Printer as ive been learning AUTOCAD drawing the past couple of months and putting my feelers out to see what people may want printed. I have been thinking about doing a range of things as pretty much I guess I could print just about anything? granted it may tak...

I've seen a similar setup with a water/methanol injection any plans to add a bit of methanol every now and then? Probably wouldnt make a huge difference but if your going for water injection why not try to incorporate methanol into the mixture bit of extra kick for fun every now and then