Sigma-galant.com

Thanks guys, starting to become a bit clearer. According to that info the Starion box is a Wide one. Will it go in the LB/LC tunnel without too much modifying? Cross member/ Tailshaft etc?

Cheers

Sorry, just saw that. I wrote Cordia , meant Starion ......

Not sure what to do, he wants 1500 for the complete car, has 17" white racing wheels with ok tyres, heaps of good parts, tach, guages etc, good glass , panels ? Unsure what any of that stuff is worth to Cordia people. I only really want the engine and box out of it. Not really in a place where ...

Thanks, I assume being injected would have to modify tank etc. The new fitech set ups for 4BBl manifolds have a tank that has a built in high pressure pump, return line etc, i mounts in the bay and is fed by the stock mech pump and lines. That would work I assume ?

I have a LB lancer Hatch with the stock 4G32B engine. Just had a look at an 84 Cordia , RWD with a turbo 5 spd motor. Guy reckons it is a 4g63 , is a single cam head, apparently had full rebuild a few years back , did 1000km and the dizzy melted. It is a belt drive motor and looks similar to the 32 ...

What is the quickest way to get the struts clear enough to remove and replace the front coil springs?
looks like the hub un bolts at the bottom and the tower bolts , will that get enough movement to remove the spring cap?

Cheers

This is for the ones on the outerside of the door glass .
Just wondering if anyone has been able to source these or come up with an alternative ? Cannot find a listing anywhere for the part. Looks like a fairly common type of strip ?
Cheers

Order one of these today, at 43 dollars more than the kit which doesn't have the parts I need , worth a go ...

http://www.ebay.com.au/itm/112046926481 ... EBIDX%3AIT

Thanks for the info, spoke to the parts shop today and you can get a kit but doesn't have a lot of the diaphragms in it. Wondering if pulling it down is the best bet ? or just trying a replacement unit?

Hi, we have recently aquired a LB hatch with a 4G32B engine. The car, starts and idles fine, under load it revs to 4k and thats it all over. Today I pulled the upper timing belt cover and checked the timing marks and they are all lined up ok, pulled the dizzy as I was struggling to get 10 degrees ti...

Cheers Taz, what size tyre ? What was the steer like ?

Hi, trying to find some info on wheel sizes people may have used. On a stock LB hatch what is the biggest rim you will get under the car and also tyre. Looking at a set of 15 x 8 but I am thinking they are too big. Also if someone has done the exercise, what is the max backspace or best offset. Woul...

Thanks mate, will give it a go

How do you remove the window covers on the far rear ones, any tricks as to not break them ?
Cheers