Sigma-galant.com

So I gpt my front disc brakes fixed up nice and ive moved to the rear drum brakes. Now Ive never taken apart drumbrakes before and I dont want to start before I have the new parts. I was thinking a hardware kit and a cylinder for each. but it seems they have 2 different hardware kits and im not sure...

thank you, they have been ordered.

Heya

Anyone know of a place where you can still get these?

I found this link, but they are out.
https://brakeparts.co.uk/shop/MITSUBISH ... es/BPF0974

Giert wrote:Oh, right!

I have the 4G32 engine, with 4-speed manual. Model A121

Have the same problem, finding parts in EU for these is a B.....

Thanks though neither ship to EU.

Also no part numbers which is what I need to find it around here, hence the ask.

Also need partnumber for the radiator.

The one in the sig ofc. ;)

Celeste 1.6 ST 1980

Shocks rear and front.
Waterpump
brakelines
brakepads
brakediscs

thats what comes to mind right now

But ti still would be nice to be able to look them up. Digitalize a manual or something for it.
8I actually havent checked if haynes have partnumbers in it)

Ordering parts is for such an old car is hard enough and often you need a part number to be sure.

Is there anywhere you can look up what the correct partnumbers is for your car?

Its prolly been asked before but I could not find any specific info.

I noticed my new LC was "hanging" on the rear left side and took off the wheels in the rear. I saw that the right side have a rubber stop but the left side dont. Is this needed/standard? and where do i get a new one and whats it called? Seems the struts are done as well and need changing(W...

I found some here, both for front and back

http://www.autodoc.co.uk/car-parts/shoc ... -6-st-a73#

Did the rockercover as well. A lot of oily dirt on that one, hard to get of, ended using ultrasound to clean it. I also think I found a place to buy new shocks, seems they have both for front and rear and they have radiators as well. Well, here is the rockercover. Before: http://www.knight-spur.dk/c...

is it just me or am i not allowed to edit my own posts?

And always start small. Started on maintenance and as I was swapping airfilter I fould it soaked in oil. So figured might as well clean it all up. http://www.knight-spur.dk/celeste/engine1.jpg http://www.knight-spur.dk/celeste/airlid.jpg I gave it some black rust paint(Hammerite). http://www.knight-...

Hi I recently required this LC from Holland(I live in Denmark) and starting on renovations slowly. Im neither an expert mechanic or rich, so it will go in the pace I can manage. Mostly I just want it to be as standard as im able. Also im having some problems finding parts, so if any have any insight...

Can you post some examples of that? Seems the Torana one is 700mm wide, which is a bit much(they seem to also only being sold in AU which again kills it on shipping(almost 3 times to price)
Cant even find a sigma rad.

I would if you where anywhere near me, I think its way to expensive to mail.

Ive been loking for a replacement radiator, alu would be nice. I havent been able to find anything for that car, so what kinda radiators do you put in? Nearest I found was the Datzun 240 Radiator, slightly longer but seems like it could be made to fit. Not looking for anything special, just a new 1....

I will be important though what they take for shipping.

Can pick up molded carpets for LA/LB/LC off ebay for 88 bucks. Multiple people contest they fit all lancers LA-C and since the LC only came in hatch my guess would be all are the same? Any change you know of a place not in AU? the shipping is more than the carpet. :( Mine seriously need a new carpet.

PM sent.

Very nice car. Yes mine have exactly the same problem as yours on the gas.
I figured it needs a full clean of the carb, but im listening here to see if anyone have another suggestion.
Grats on the car.

Yes, that seems to be the biggest problem.
Used parts for it seems far apart.

Does it share parts with any of the newer mitsus, like the Cordia or summat?(Except for engine ofc.)

Hi all
Im from Denmark and is 43. Been playing with Mitsubishis for around 12 years. Having a Carisma, a Galant VR4 from 1991.
and now I have a Celeste 1600 ST from 1980.

Hoping this is the place to get help on that car.

Here is a pic.

Hi, just a question.
Ive just gotten a 1980 Celeste 1600 ST and I noticed earlier you had a workshop manual for it you considered scanning.
Did you ever det around to that and would that be possible to get? Ive had no luck finding 1.

btw I rather like the 2tone color on yours.

Brgds Morten